|
|||||
|
|
| 轮式装载机横梁与摇臂干涉问题的可视化解决方案 | |
| 引用本文： | 王国彪,柳青,张宗山.轮式装载机横梁与摇臂干涉问题的可视化解决方案[J].农业机械学报,2001,32(1):31-33. |
| 作者姓名： | 王国彪 柳青 张宗山 |
| 作者单位： | 1. 北京科技大学资源工程学院 教授 博士, 2. 蚌埠安利机器厂总工程师 高级工程师, 3. 蚌埠安利机器厂技术处处长 高级工程师 |
| 基金项目： | 国家自然科学基金资助项目 !(项目编号 :5 970 5 0 10 )，教育部优秀青年骨干教师资助项目 |
| 摘 要： | 轮式装载机的横梁是工作装置连杆机构与动臂间的重要连接构件，但在工作装置设计，时常发生横梁与摇臂的干涉现象。以ZL50型装载机为例，利用CAD和可视化技术，确定了干涉区域的位置与最在干涉量，并提出了解决问题的2种实用方案，成功地解决了设计中遇到的技术难题。 |
| 关 键 词： | 轮式装载机 可视化 工作装置 干涉问题 |
| 修稿时间： | 2000年8月7日 |
Visualized Approaches to Interference between the Boomand the Cross beam of a Wheeled Loader |
|
| Wang Guobiao,Liu Qing,Zhang Zongshan.Visualized Approaches to Interference between the Boomand the Cross beam of a Wheeled Loader[J].Transactions of the Chinese Society of Agricultural Machinery,2001,32(1):31-33. | |
| Authors: | Wang Guobiao Liu Qing Zhang Zongshan |
| Institution: | Wang Guobiao(University of Science and Technology Beijing) Liu Qing Zhang Zongshan(Bengbu Anli Machinery Factory) |
| Abstract: | A cross beam is an important link member, which is a link between the working device Z bar linkage and the boom of a wheeled loader. The moving relationship of the linkage is so complicated that the interference between the boom and the cross beam is often occurred during the manual design of the working device. Using CAD and visualization techniques, this paper took a ZL50 wheeled loader as an example, the interference zone and the maximum value of the interference were determined automatically, and two practical methods for solving the interference were presented. One method is to modify the dimension of the cross beam, and the other is to modify the dimension of the rocker arm. The two methods are all of available. As the former method has the advantage over the latter one, it is finally adopted in practice. |
| Keywords: | Wheeled loader Interference Visualization |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |