| 基于Ansys的履带销轴的载荷与应力分析 |
| |
| 引用本文： | 车健壮,娄晓丹,王成军,王绍清,孙钿科,于红娟,曲庆文.基于Ansys的履带销轴的载荷与应力分析[J].农业装备与车辆工程,2012(3):26-28. |
| |
| 作者姓名： | 车健壮 娄晓丹 王成军 王绍清 孙钿科 于红娟 曲庆文 |
| |
| 作者单位： | 淄博市科学技术情报研究所;山东理工大学机械工程学院 |
| |
| 摘 要： | 根据履带式车辆中履带的受力状态,在一定的假设的前提下分析销轴的载荷状态,应用ANSYS的基本分析方法对履带销轴进行应力与变形分析,然后利用经典Hertz接触理论分析,研究分析结果,得出有限元分析模型建立对于ANSYS分析的影响。其分析方法和结果可广泛用于机械设备销轴的设计研究。
|
| 关 键 词： | 履带 销轴 ANSYS |
Load and Stress Analysis of the Track Pin Shaft Based on Ansys |
| |
| Che Jianzhuang,Lou Xiaodan,Wang Chengjun,Wang Shaoqing,Sun Tianke,Yu Hongjuan,Qu Qingwen.Load and Stress Analysis of the Track Pin Shaft Based on Ansys[J].Agricultural Equipment & Vehicle Engineering,2012(3):26-28. |
| |
| Authors: | Che Jianzhuang Lou Xiaodan Wang Chengjun Wang Shaoqing Sun Tianke Yu Hongjuan Qu Qingwen |
| |
| Institution: | 1. Scientific and Technical Information Institute of Zibo,Zibo 255040, China; 2.Department of Mechanical Engineering of Shandong University of Technology,Zibo 255049, China) |
| |
| Abstract: | According to the stress condition of the track in tracked vehicle, the load condition of the pin shaft is analyzed under certain assumptions. The stress and deformation analysis is conducted with the basic analysis method of ANSYS, and then the results are studied based on the classical Hertz contact theory, finally the influence of ANSYS analysis based on the building of finite element model is drawn. The analysis method and results can be widely used in mechanical equipment design and research on the pin shaft. |
| |
| Keywords: | track pin shaft ANSYS |
| 本文献已被 CNKI 等数据库收录！ |
|
