| 基于ANSYS的西兰花收获悬挂斗设计 |
| |
| 引用本文： | 杜佳诚,於海明,张锦文,陈奕同,陈坤杰.基于ANSYS的西兰花收获悬挂斗设计[J].农业工程,2019,9(8):102-107. |
| |
| 作者姓名： | 杜佳诚 於海明 张锦文 陈奕同 陈坤杰 |
| |
| 作者单位： | 南京农业大学工学院，江苏 南京210031 |
| |
| 基金项目： | 南京农业大学大学生创新创业训练项目（项目编号：1830A02） |
| |
| 摘 要： | 随着我国城镇化速度加快，农村劳动力的减少，而西兰花收获几乎完全依赖人力，亟需推进西兰花的自动化收获。国内对于西兰花收获的相关研究很少，其自动化收割尚处于理论试验阶段。该文利用CATIA软件建模，ANSYS-Workbench进行模态分析，设计西兰花收获的悬挂斗，可实现西兰花收获的半自动化，减轻劳动强度。该方法可将收获效率提高2.6倍，节约半数劳动力。
|
| 关 键 词： | 西兰花 机械收获 悬挂斗 模态分析 |
| 收稿时间： | 2019/4/17 0:00:00 |
| 修稿时间： | 2019/5/13 0:00:00 |
Design on Broccoli Harvesting Suspension Bucket Based on ANSYS |
| |
| DU Jiacheng,YU Haiming,ZHANG Jinwen,CHEN Yitong and CHEN Kunjie.Design on Broccoli Harvesting Suspension Bucket Based on ANSYS[J].Agricultural Engineering,2019,9(8):102-107. |
| |
| Authors: | DU Jiacheng YU Haiming ZHANG Jinwen CHEN Yitong and CHEN Kunjie |
| |
| Abstract: | With acceleration of urbanization in China and reduction of rural labor force，broccoli harvest is almost entirely dependent on human resources，so it is urgent to promote automatic harvest of broccoli.There were few studies on broccoli harvesting，and its automatic harvesting is still in experimental stage of treatment theory.CATIA software and ANSYS-Workbench were used to carry out modal and analysis.The suspension bucket for broccoli harvesting was designed，which could realize the semi-automation of broccoli harvesting and reduce labor intensity.This method could increase harvesting efficiency by 2.6 times and save half of labor force. |
| |
| Keywords: | |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《农业工程》浏览原始摘要信息 |
| 点击此处可从《农业工程》下载免费的PDF全文 |
