| 制种玉米收获台台架试验 |
| |
| 引用本文： | 刘淑平,唐遵峰,马立军,高威,包春林.制种玉米收获台台架试验[J].农业工程,2018,8(8):92-95. |
| |
| 作者姓名： | 刘淑平 唐遵峰 马立军 高威 包春林 |
| |
| 作者单位： | 1.现代农装科技股份有限公司，北京100083 |
| |
| 基金项目： | 国家重点研发计划（项目编号：2016YFD0701905） |
| |
| 摘 要： | 目前，我国制种玉米收获机械化水平较低，主要依靠人力完成。为解决这一问题，设计了一种制种玉米收获台，并进行了摘穗辊转速、割台高度和收获速度的3因素3水平正交试验。试验结果表明，该收获台对于制种玉米收获达到了较好的效果。对3因素和考核指标之间的关系进行了分析，摘穗辊转速800 r/min、收获速度5 km/h、割台高度600 mm时，指标效果最佳。
|
| 关 键 词： | 制种玉米 收获台 正交试验 果穗损失 |
Bench Test on Header of Seed Corn-harvester |
| |
| LIU Shuping,TANG Zunfeng,MA Lijun,GAO Wei and BAO Chunlin.Bench Test on Header of Seed Corn-harvester[J].Agricultural Engineering,2018,8(8):92-95. |
| |
| Authors: | LIU Shuping TANG Zunfeng MA Lijun GAO Wei and BAO Chunlin |
| |
| Abstract: | Level of seed corn harvest mechanization was low that had always been artificial in our country at present.In order to solve this problem，a header of corn-harvester was designed，orthogonal experiment based on three factors and three levels which included rotating speed of snapping roll，header height and harvest speed was conducted.Experimental results showed that header of seed corn-harvester had good harvest effect.Relationship between three factors and performance indicators were analyzed.Effect of indicators was best when speed of snapping roll was 800 r/min，harvest speed was 5 km/h and height of header was 600 mm. |
| |
| Keywords: | |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《农业工程》浏览原始摘要信息 |
| 点击此处可从《农业工程》下载免费的PDF全文 |
