首页 | 本学科首页   官方微博 | 高级检索  
     检索      

水肥一体机EC传感器安装特性试验研究
作者单位:;1.中工武大设计研究有限公司;2.湖北省精准农业工程技术研究中心
摘    要:【目的】确定水肥一体机EC传感器最佳安装角度。【方法】通过试验测定不同安装角度条件下,肥液的电导率值。【结果】从偏差系数可以看出,90°条件下(EC传感器处于水平位置),EC传感器所测得的EC值波动范围最小,其EC监测通道监测效果最好。且90°、135°、180°条件下,EC监测通道的监测效果要明显优于0°和45°条件。【结论】水肥一体机的EC传感器最佳安装角度为90°。同时,为避免溶质粘附在EC传感器的电极上面影响测量精度,应选用90(°水平方向)安装EC传感器,而不采用135°和180°条件安装。

关 键 词:水肥一体机  EC监测通道  偏差系数

Experimental Study on Installation Characteristics of EC Sensor for Integrated Water and Fertilizer Machine
Institution:,CAMCE WHU DESIGN&RESEARCH CO.,LTD,Hubei Precision Agriculture Engineering Technology Research Center
Abstract:【Objective】Determine the optimal installation Angle of EC sensor【.Method】The conductivity of fertilizer solution was tested under different installation angles【.Result】Based on the deviation factor, 90 °(EC sensors in a horizontal position), under the condition of EC sensor measured by the EC minimum value range, its EC channel monitoring effect was best. And 90 °, 135 °, 180 °, under the condition of EC channel monitoring effect was significantly better than that of 0 ° and 45 ° conditions【.Conclusion】The optimum installation angle of EC sensor of the water and fertilizer integrated machine was 90°.
Keywords:integrated water-fertilizer machine  EC monitoring channels  deviation coefficient
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号