| 矩形迷宫式滴灌灌水器的模拟研究 |
| |
| 引用本文： | 张琴,叶含春,管瑶.矩形迷宫式滴灌灌水器的模拟研究[J].农机化研究,2012(1):190-194,198. |
| |
| 作者姓名： | 张琴 叶含春 管瑶 |
| |
| 作者单位： | 塔里木大学水利与建筑工程学院 |
| |
| 基金项目： | 新疆塔里木大学校长基金硕士项目(TDZKSS08007) |
| |
| 摘 要： | 利用Fluent软件对滴灌灌水器流道内流体流动进行了数值模拟,得到了流道压力图、流速矢量图。根据流道内流线变化对灌水器流道结构进行了优化设计,采用了圆弧形流道结构。通过优化前、后的速度矢量图可知:优化后的滴头流道涡旋区和低速滞止区基本消除,虽然在流道拐弯处的小部分区域内流体流动速度仍有些偏高,但是从流道整体来看,优化后的流道内主流速度分布比较均匀,且流体充满整个流道,大大提高了灌水器的抗堵塞性能。
|
| 关 键 词： | 灌水器 流速 数值模拟 |
Numerical Simulation of Drip Emitter Channel |
| |
| Zhang Qin,Ye Hanchun,Guan Yao.Numerical Simulation of Drip Emitter Channel[J].Journal of Agricultural Mechanization Research,2012(1):190-194,198. |
| |
| Authors: | Zhang Qin Ye Hanchun Guan Yao |
| |
| Institution: | (College of Water Conservancy and Architecture Engineering,Tarim University,Alar 843300,China) |
| |
| Abstract: | Numerical simulation of drip Emitter channel by CFD software,obtained the pressure and the vector curve of velocity distribute of channel,optimum channel structure design and adoptive the arc-structure channel.Compared with former vector curve of velocity,it is found that,the turbulent flow and stagnant region are deleted in the arc-structure channel,although the turning area have higher velocity,but on the whole channel,the velocity distribute is better-distributed,and full of entire channel,it is enhanced anti-clogging performance of emitter channel. |
| |
| Keywords: | drip emitter velocity numerical simulate |
| 本文献已被 CNKI 等数据库收录！ |
|
