首页 | 本学科首页   官方微博 | 高级检索  
     检索      

纳米压痕技术测量管胞次生壁S2层的纵向弹性模量和硬度
引用本文:江泽慧,余雁,费本华,任海青,张泰华.纳米压痕技术测量管胞次生壁S2层的纵向弹性模量和硬度[J].林业科学,2004,40(2):113-118.
作者姓名:江泽慧  余雁  费本华  任海青  张泰华
作者单位:1. 中国林业科学研究院木材工业研究所,北京,100091
2. 中国科学院力学研究所非线性力学国家重点实验室,北京,100080
基金项目:国家重点基础研究发展规划 ( 973 )资助 (G19990 160 0 1)
摘    要:重点研究和详细介绍了利用纳米压痕技术测试管胞次生壁S2 层纵向弹性模量以及硬度的实验技术 ,并测试了人工林杉木早晚材管胞S2 层的纵向弹性模量和硬度。结果表明 :杉木晚材管胞S2 层的平均纵向硬度为0 390GPa ,弹性模量的平均值为 1 4 84 4GPa ;早材管胞S2 层的硬度和模量则小于晚材 ,平均值分别为 0 30 6GPa和9 82 3GPa。

关 键 词:纳米压痕技术  管胞  弹性模量  硬度
文章编号:1001-7488(2004)02-0113-06
修稿时间:2002年8月26日

Using Nanoindentation Technique to Determine the Longitudinal Elastic Modulus and Hardness of Tracheids Secondary Wall
Jiang Zehui Yu Yan Fei Benhua Ren Haiqing.Using Nanoindentation Technique to Determine the Longitudinal Elastic Modulus and Hardness of Tracheids Secondary Wall[J].Scientia Silvae Sinicae,2004,40(2):113-118.
Authors:Jiang Zehui Yu Yan Fei Benhua Ren Haiqing
Abstract:The detailed experimental procedure of using nanoindentation technique to determine the longitudinal elastic modulus and nano hardness of tracheids secondary wall was emphasized, base on which the longitudinal mechanical properties of Chinese Fir tracheids were measured. It was indicated both hardness and elastic modulus of latewood secondary wall were higher than earlywood cell wall. The longitudinal elastic modulus and hardness of latewood tracheids S 2 layer were 14 844?GPa and 0 390 GPa respectively, while and earlywood cell wall S 2 layer had a corresponding value of 9 823 and 0 306 GPa.
Keywords:Nanoindentation technique  Tracheids  Elastic modulus  Hardness
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号