| 利用动态热机械分析仪对低毒脲醛树脂性能的研究 |
| |
| 引用本文： | 朱丽滨,顾继友.利用动态热机械分析仪对低毒脲醛树脂性能的研究[J].林产工业,2006,33(5):36-38. |
| |
| 作者姓名： | 朱丽滨 顾继友 |
| |
| 作者单位： | 东北林业大学,哈尔滨,150040 |
| |
| 基金项目： | 国家自然科学基金资助项目“低甲醛释放脲醛树脂固化机理研究”,主任专项基金项目,批准号:30240069 |
| |
| 摘 要： | 利用动态热机械分析(DMA)对不同固化体系下3种低毒UF树脂固化物的力学性能进行了研究。试验结果表明:不同固化体系下3种低毒UF树脂固化物的力学性能不同。对于UF-1,使用氯化铵为固化剂,树脂交联固化程度要高于其他两种固化体系,固化物储存模量最高。对于UF-2来说,在3种固化体系下,固化物的储存模量之间相差不是很大。对于UF-3,在第2种固化体系条件下,固化物的储存模量最大,损耗角正切最小。因此在实际应用过程中,针对不同的低毒UF树脂胶黏剂需要选择与之相匹配的固化体系,才能达到最佳的固化效果和胶接强度。
|
| 关 键 词： | 动态热机械分析 低毒脲醛树脂 力学性能 |
| 文章编号： | 1001-5299(2006)05-0036-03 |
| 修稿时间： | 2005年11月23 |
Study on Properties of Low Toxic UF Resin Using DMA |
| |
| ZHU Li-bin,GU Ji-you.Study on Properties of Low Toxic UF Resin Using DMA[J].China Forest Products Industry,2006,33(5):36-38. |
| |
| Authors: | ZHU Li-bin GU Ji-you |
| |
| Abstract: | Mechanical properties of 3 types of low toxic UF resin cured with different curing system were studied. Experiment results showed mechanical properties of 3 types of low toxic UF cured with different curing system were different. For UF-1,the curing degree cured with NH4Cl was higher than that with the other curing system. For UF-2, there were no great difference of storage modulus when cured with defferent curing system.For UF-3,when cured with the second system, the storage modulus was the greatest and the loss tangent was smallest among that cured with 3 curing system. |
| |
| Keywords: | DMA Low toxic urea-formaldehyde resin Mechanics properties |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
