首页 | 本学科首页   官方微博 | 高级检索  
     检索      

大豆蛋白-三聚氰胺-尿素-甲醛树脂胶黏剂固化剂的研究
引用本文:吴志刚,张本刚,梁坚坤,席雪冬,雷洪,余丽萍,周晓剑.大豆蛋白-三聚氰胺-尿素-甲醛树脂胶黏剂固化剂的研究[J].西北林学院学报,2019(5):212-217.
作者姓名:吴志刚  张本刚  梁坚坤  席雪冬  雷洪  余丽萍  周晓剑
作者单位:西南林业大学云南省木材胶黏剂及胶合制品重点实验室;贵州大学林学院;凯里学院
基金项目:国家自然科学基金(31800481,31660176、31870546);云南省教育厅科学研究基金项目(2017ZZX209);贵州省科技支撑项目(黔科合支撑[2019]2308和[2019]2325);贵州省林业厅项目(黔林科合[2017]14);西南林业大学校启动基金项目(111814)
摘    要:以大豆蛋白降解液、三聚氰胺、尿素和高浓度甲醛为原料,合成了一种低摩尔比的大豆蛋白-三聚氰胺-尿素-甲醛共缩聚树脂胶黏剂(SMUF)。选用(NH4)2SO4、(NH4)2S2O8、(NH4)2HPO4和H3PO4作为SMUF树脂的固化剂,研究了固化剂对SMUF树脂基本理化性能的影响。结果表明:1)传统固化剂(NH4)2SO4不能使SMUF树脂充分固化,最终树脂胶合强度低、耐水性差,固化后的胶层断面疏松、多孔;2)H3PO4和(NH4)2S2O8属于中强酸体系,两者均能一定程度加速SMUF树脂的固化,树脂胶合强度和耐水性均得到改善,固化温度显著降低,固化放热量有所提高;3)(NH4)2HPO4是一种缓冲型酸,其催化SMUF树脂的固化速度较为均匀,树脂综合性能较优,树脂的胶合强度和耐水性较好,固化温度也有所降低,树脂交联程度高,树脂固化层断面相对较为均匀。

关 键 词:大豆蛋白-三聚氰胺-尿素-甲醛树脂  固化剂  胶合性能  固化特征  热性能

Development of Curing Agent of Soy Protein-Melamine-Urea-Formaldehyde (SMUF) Resin
WU Zhi-gang,ZHANG Ben-gang,LIANG Jian-kun,XI Xue-dong,LEI Hong,YU Li-ping,ZHOU Xiao-jian.Development of Curing Agent of Soy Protein-Melamine-Urea-Formaldehyde (SMUF) Resin[J].Journal of Northwest Forestry University,2019(5):212-217.
Authors:WU Zhi-gang  ZHANG Ben-gang  LIANG Jian-kun  XI Xue-dong  LEI Hong  YU Li-ping  ZHOU Xiao-jian
Institution:(Yunnan Provincial Key Laboratory of Wood Adhesives and Glued Products,Southwest Forestry University,Kunming 650224,Yunnan China;College of Forestry,Guizhou University,Guiyang 550025,Guizhou,China;Kaili University,Qiandongnan 556011,Guizhou,China)
Abstract:A soy protein-melamine-urea-formaldehyde resin with lower molar ratio was prepared by using soy protein degradation fluid,melamine,urea and high concentration formaldehyde.(NH 4) 2SO 4,(NH 4) 2S 2O 8,(NH 4) 2HPO 4 and H 3PO 4 were as used to investigate the effect of these curing agents on the basci phycial-chemcial properties of SMUF resin.The results showed that 1)(NH 4) 2SO 4 could not fully cure SMUF resin,the resultant resin had lower bonding strength,inferior water resistance,and loose and porous curing interface.2) H 3PO 4 and (NH 4) 2S 2O 8 belonged to medium strong acid system,they could accelerate the curing speed of SMUF resin in some extents.The bonding strength and water resistance were improved,although curing temperature decreased significantly,curing exothermic value increased.3)(NH 4) 2HPO 4 was a buffering acid,the curing speed was very uniform.The resin performances,bonding strength,and water resistance were better.The curing temperature was lower and the resin curing interface was uniform.
Keywords:soy protein-melamine-urea-formaldehyde resin (SMUF) curing agent  bonding performance  curing behavior  thermal performance
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号