| 圆木无卡旋切机单片机控制系统的设计 |
| |
| 引用本文： | 陈学永,潘天红.圆木无卡旋切机单片机控制系统的设计[J].福建农林大学学报(自然科学版),2003,32(4):531-534. |
| |
| 作者姓名： | 陈学永 潘天红 |
| |
| 作者单位： | 1. 福建农林大学机电工程学院,福建,福州,350002
2. 江苏大学电气学院,江苏,镇江,212013 |
| |
| 摘 要： | 首先分析了传统有卡圆木单板旋切机的缺陷和圆木无卡单板旋切机存在旋切单板厚度不均的根本原因;介绍了圆木无卡单板旋切的基本原理,提出利用单片机作为控制系统,以提高圆木无卡旋切机的控制精度和灵活调整旋切单板厚度.最后详细介绍了该控制系统的硬件和软件设计.本系统在原有圆木无卡单板旋切机长时间运行的结果表明该控制系统稳定可靠,单板厚度精度达到±0.075mm.
|
| 关 键 词： | 单片机 单板旋切机 圆木无卡旋切机 自动控制 |
| 文章编号： | 1006-7817(2003)04-0531-04 |
| 修稿时间： | 2002年9月20日 |
Design of round wood non-center peeling control system |
| |
| CHEN Xue-yong,PAN Tian-hong.Design of round wood non-center peeling control system[J].Journal of Fujian Agricultural and Forestry University,2003,32(4):531-534. |
| |
| Authors: | CHEN Xue-yong PAN Tian-hong |
| |
| Institution: | CHEN Xue-yong~1,PAN Tian-hong~2 |
| |
| Abstract: | The defect of traditional round wood peeling machine and the basic reason of uneven thickness of non-center peeling were analyzed. The principle of round wood non-center peeling was introduced. The control system of round wood non-center peeling, which uses chip microprocessor to promote the precision of peeling machine and adjusting peeling thickness, was put forward. The design of hardware and software of this system was introduced in detail. The system has been proved to be reliable by running in round wood non-center peeling machine, and its thickness precision was ±0.075 mm. |
| |
| Keywords: | single chip microcomputer peeling machine round wood non-center peeling machine automatic control |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
