首页 | 本学科首页   官方微博 | 高级检索  
     检索      

喷雾干燥工艺条件对速溶龙眼粉理化特性的影响
引用本文:苏东晓,廖森泰,张名位,侯方丽,唐小俊,魏振承,张瑞芬,池建伟,张雁,邓媛元.喷雾干燥工艺条件对速溶龙眼粉理化特性的影响[J].中国农业科学,2011,44(18):3830-3839.
作者姓名:苏东晓  廖森泰  张名位  侯方丽  唐小俊  魏振承  张瑞芬  池建伟  张雁  邓媛元
作者单位:1.广东省农业科学院农业生物技术研究所/农业部功能食品重点开放实验室; 2. 华中农业大学食品科技学院
基金项目:NSFC-广东联合基金项目(U0731005); 广东省自然科学基金团队项目(06200586)
摘    要: 【目的】分析喷雾干燥进风温度和热风流量对速溶龙眼粉理化特性的影响。【方法】分别考察喷雾干燥不同进风温度和不同热风流量对速溶龙眼粉水分含量、堆积密度、黏性、溶解性、水分吸附特性、玻璃化转变温度和超微结构等理化特性的影响。【结果】当进风温度从160℃升高到190℃、热风流量从23.00 m3?h-1增加到29.00 m3?h-1时,速溶龙眼粉水分含量分别降低25.52%和39.42%;黏度值分别下降55.75%和61.11%;玻璃化转变温度分别升高8.30℃和7.07℃;溶解时间分别增加1.29倍和1.47倍;堆积密度分别提高22.87%和20.15%;同时,单分子层水分含量、微粒形态、L*、a*、b*、色调和色度随之变化。【结论】加工理化特性优良的速溶龙眼粉需严格控制喷雾干燥的进风温度和热风流量等工艺参数。

关 键 词:喷雾干燥  工艺条件  速溶龙眼粉  理化特性
收稿时间:2010-10-25

Effect of Spray Drying Processing on the Physicochemical Properties of Instant Longan Powder
SU Dong-xiao,LIAO Sen-tai,ZHANG Ming-wei,HOU Fang-li,TANG Xiao-jun,WEI Zhen-cheng,ZHANG Rui-fen,CHI Jian-wei,ZHANG Yan,DENG Yuan-yuan.Effect of Spray Drying Processing on the Physicochemical Properties of Instant Longan Powder[J].Scientia Agricultura Sinica,2011,44(18):3830-3839.
Authors:SU Dong-xiao  LIAO Sen-tai  ZHANG Ming-wei  HOU Fang-li  TANG Xiao-jun  WEI Zhen-cheng  ZHANG Rui-fen  CHI Jian-wei  ZHANG Yan  DENG Yuan-yuan
Institution:SU Dong-xiao1,2,LIAO Sen-tai1,ZHANG Ming-wei1,HOU Fang-li1,TANG Xiao-jun1,WEI Zhen-cheng1,ZHANG Rui-fen1,CHI Jian-wei1,ZHANG Yan1,DENG Yuan-yuan1(1 Bio-Tech Research Institute of Guangdong Academy of Agricultural Science/Key Laboratory of Functional Food,Ministry of Agriculture,Guangzhou 510610,2Food Science and Technology College,Huazhong Agricultural University,Wuhan 430070)
Abstract:【Objective】 The effects of inlet temperature and hot air rate on the physicochemical properties of instant longan powder were studied. 【Method】 Different inlet temperatures and different hot air rates on the physicochemical properties of instant longan powder were determined, such as moisture content, bulk density, stickiness, dissolution time, isotherms of water sorption, glass transition temperature and microstructure. 【Result】 With the inlet temperature increased from 160℃ to 190℃ or hot air rate increased from 23.00 m3?h-1 to 29.00 m3?h-1, the moisture content decreased by 25.52% and 39.42%, stickiness declined by 55.75% and 61.11%, but glass transition temperature increased by 8.30 ℃ and 7.07 ℃, dissolution time increased by 1.29 times and 1.47 times, and bulk density increased by 22.87% and 20.15%. And simultaneously there were changes in L*, a*, b*, hue, chroma values, monolayer moisture content and microstructure of the spray-dried powder for all inlet temperature investigated. 【Conclusion】 It is important to control the parameters of spray drying machine for producing excellent instant longan powder.
Keywords:spray drying  processing  instant longan powder  physicochemical properties  
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《中国农业科学》浏览原始摘要信息
点击此处可从《中国农业科学》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号