首页 | 本学科首页   官方微博 | 高级检索  
     检索      

水稻穗上不同部位籽粒碾米品质的差异
引用本文:董明辉,桑大志,王朋,唐成,杨建昌.水稻穗上不同部位籽粒碾米品质的差异[J].中国农业科学,2005,38(10):1973-1979.
作者姓名:董明辉  桑大志  王朋  唐成  杨建昌
作者单位:扬州大学江苏省作物遗传生理国家重点实验室培育基地 扬州225009 (董明辉,桑大志,王朋,唐成),扬州大学江苏省作物遗传生理国家重点实验室培育基地 扬州225009(杨建昌)
基金项目:国家自然科学基金项目(30370828,30400276)和江苏省自然科学基金项目(BK2003041)资助.
摘    要: 以中熟籼稻扬稻6号和中熟粳稻武育粳3号为材料,研究了在不同施肥水平下,稻米碾米品质在穗上不同部位和不同粒位籽粒间的差异及其分布特点。结果表明,就总体而言,在稻穗的同一部位,两品种一次枝梗籽粒的出糙率、精米率和整精米率高于二次枝梗的籽粒;二次枝梗上籽粒的出糙率、精米率和整精米率以第1粒位籽粒较低,第4或第3位的籽粒较高;一次枝梗上第2粒位籽粒的出糙率和整精米率较高,第1粒位籽粒的较低;精米率在穗上不同部位及一次枝梗上的分布因施氮量的不同而异。武育粳3号穗上各部位一、二次枝梗籽粒的碾米品质优于扬稻6号,穗上同一部位二次枝梗籽粒的碾米品质在两品种间的差异大于一次枝梗。施氮量在0~240 kg·ha-1范围内,增施氮肥可改善稻米的碾米品质。

关 键 词:水稻  粒位  碾米品质  氮素
收稿时间:04 29 2005 12:00AM
修稿时间:2005-04-29

Variations in the Milling Quality of Grains at Different Positions Within a Rice Panicle
DONG Ming-hui,SANG Da-zhi,WANG Peng,TANG Cheng,YANG Jian-chang.Variations in the Milling Quality of Grains at Different Positions Within a Rice Panicle[J].Scientia Agricultura Sinica,2005,38(10):1973-1979.
Authors:DONG Ming-hui  SANG Da-zhi  WANG Peng  TANG Cheng  YANG Jian-chang
Abstract:Milling quality of the grain is one of the most important quality indexes of rice. However, little is known what difference in the milling characters among the grains at different positions within a rice panicle. This study has investigated the distribution of the percentages of brown rice (BR), milled rice (MR) and head rice (HR) for different grains on a panicle. Two rice cultivars, Yangdao 6 (indica rice) and Wuyujing 3 (japonica rice), were field-grown. Three levels of nitrogen, 0, 120 kg·ha-1, and 240 kg·ha-1, were applied at pre-planting and topdressing. All primary branches on a panicle were evenly divided into three parts of the upper, middle and basal. The grains were numbered as 1 to 6 on a primary branch and 1 to 3 or 4 on a secondary branch from the top to base. Generally, BR, MR and HR for the grains on a primary branch were greater than those on a secondary branch at the same part of a panicle. On a secondary branch, the grain 1 had the least BR, MR and HR, and the grain 3 or 4 had the greatest. On a primary branch, the grain 2 had the greatest BR and HR, and the grain 1 had the least; the distribution of MR at different positions within a rice panicle or on a secondary branch varied with the amount of nitrogen applied. The milling quality of the grains at different parts in a panicle of Wuyujing 3 was better than those of Yangdao 6, especially the grains on a secondary at the same part of a panicle. Application of nitrogen fertilizer could improve the milling quality of rice when the amount of nitrogen was between 0 and 240 kg·ha-1.
Keywords:Rice  Grain position  Milling quality  Nitrogen
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《中国农业科学》浏览原始摘要信息
点击此处可从《中国农业科学》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号