Laboratory Measurement of Mowing Machine Material Feed Rate

The main objective of this research was to evaluate two possibilities of material feed rate measurement of modern mowing machines equipped with conditioner. The machines are commonly used for harvest of grasses (Lolium multiflorum, Dactylus glomerata, Phleum pratense, etc.), clover (Trifolium pratense, etc.), alfalfa (Medicago sativa) etc.A mowing machine with finger conditioner was equipped with an electronic measuring unit for the purpose of our measurements. The mowing machine's conditioner shaft was supplied with strain gauges placed on a torque-meter and with a RPM optical sensor counter. Together with torque-meter the mowing machine was equipped with a curved impact plate mounted on the machine's material output.It was decided to arrange a laboratory measurement to obtain information about the dependence of conditioner power input and signals from the impact plate on material mass flow. A mixture of grass and alfalfa was used for our measurement.The measurements carried out proved that a very good linear relationship existed between the conditioner's power input, output frequency of the apparatus measuring impact force by means of the impact plate, and material feed rate through the mowing machine. The calculated coefficients of correlation were about 0.95. It is possible to differentiate a material feed rate difference of 0.5kgs^–1 using both methods. This accuracy should be sufficient for practical utilisation such as creating yield maps.