首页 | 本学科首页   官方微博 | 高级检索  
     检索      

稻麦联合收割机碎草机构实时监控系统的研制
引用本文:杨腾祥,陈满,金诚谦,徐金山,倪有亮.稻麦联合收割机碎草机构实时监控系统的研制[J].中国农业大学学报,2019,24(8):114-119.
作者姓名:杨腾祥  陈满  金诚谦  徐金山  倪有亮
作者单位:农业农村部南京农业机械化研究所
基金项目:国家重点研发计划重点专项(2016YFD0702003);现代农业产业技术体系建设专项资金项目(CARS-04-PS26)
摘    要:针对现有稻麦联合收割机秸秆切碎抛撒装置智能化水平不高,相关参数监测系统缺乏等问题,基于机电一体化控制技术,研制稻麦联合收割机秸秆切碎抛撒装置监控系统。该系统由推杆电机、霍尔传感器、扭矩传感器、位移传感器、人机交互终端以及电子控制单元(ECU)等组成,人机交互终端采用组态触摸屏,通过485总线与电子控制单元进行实时信息交互,实现转速、开度等系统参数实时采集、显示与存储,并能够根据作业要求控制推杆电机控制撒布板开度,实现秸秆半幅和全幅抛撒。实时调整抛撒效果。将此系统应用于秸秆切碎抛撒试验台,在秸秆切碎抛撒试验台上进行系统性能测试试验,结果表明:监控系统操作简单,参数测量精度达到94%以上,推杆的控制精度达到90%以上,系统具有良好的鲁棒性,能够满足稻麦机械化收获的相关要求。

关 键 词:稻麦联合收割机  秸秆  数据采集  实时控制
收稿时间:2018/12/7 0:00:00

Design of real-time monitoring system for grass breaking mechanism of combine harvester
YANG Tengxiang,CHEN Man,JIN Chengqian,XU Jinshan and NI Youliang.Design of real-time monitoring system for grass breaking mechanism of combine harvester[J].Journal of China Agricultural University,2019,24(8):114-119.
Authors:YANG Tengxiang  CHEN Man  JIN Chengqian  XU Jinshan and NI Youliang
Institution:Nanjing Research Institute for Agricultural Mechanization, Ministry of Agriculture, Nanjing 210014, China,Nanjing Research Institute for Agricultural Mechanization, Ministry of Agriculture, Nanjing 210014, China,Nanjing Research Institute for Agricultural Mechanization, Ministry of Agriculture, Nanjing 210014, China,Nanjing Research Institute for Agricultural Mechanization, Ministry of Agriculture, Nanjing 210014, China and Nanjing Research Institute for Agricultural Mechanization, Ministry of Agriculture, Nanjing 210014, China
Abstract:In order to solve the problems of low intelligence and lacking of monitoring system for relevant parameters in the existing straw shredding and throwing device of rice-wheat combine harvester,a monitoring system for straw shredding and throwing device of rice-wheat combine harvester is developed based on the mechatronic control technology.The system is composed of push-rod motor,hall sensor,torque sensor,displacement sensor,man-machine interaction terminal and electronic control unit (ECU) and so on.The man-machine interaction terminal uses configuration touch screen to carry out real-time information interaction with the electronic control unit through RS485 bus to realize real-time collection,display and storage of system parameters such as rotation speed and opening degree.This terminal can control push rod motor to control the opening degree of spreader plate according to operation requirements to realize half-width and full-width scattering of straw and adjust the throwing effect in real time.The system is applied to the straw chopping and throwing test bench and the performance test of the system is carried out on the straw chopping and throwing test bench.The results show that the monitoring system is simple to operate,the parameter measurement accuracy reaches more than 94%,the control accuracy of the push rod reaches more than 90%.The system also has good robustness and can meet the relevant requirements of rice and wheat mechanized harvesting.
Keywords:combine-harvester  straw  data collection  real-time control
本文献已被 CNKI 等数据库收录!
点击此处可从《中国农业大学学报》浏览原始摘要信息
点击此处可从《中国农业大学学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号