顶空-气质联用法分析水基胶中的苯系物 |
| |
引用本文: | 黄惠贞,梁晖,刘秀彩.顶空-气质联用法分析水基胶中的苯系物[J].安徽农业科学,2012(27):13598-13600. |
| |
作者姓名: | 黄惠贞 梁晖 刘秀彩 |
| |
作者单位: | 福建中烟工业公司技术中心,福建厦门,361022 |
| |
摘 要: | 目的]测定水基胶中的苯系物。方法]分别对不同的前处理方法、溶剂、顶空平衡时间和平衡温度进行比较选择,并采用气质联用法/SIM测定水基胶中的苯、甲苯、乙苯、邻二甲苯、间二甲苯、对二甲苯。结果]N,N-二甲基甲酰胺为最佳溶剂,顶空条件为最佳前处理手段,且其最佳平衡温度80℃,最佳平衡时间15 min;该方法的回收率为96.96%~105.19%,RSD为1.082%~2.082%,定量限为0.003~0.016 mg/kg。结论]顶空-气质联用法前处理简单、污染小,方法简单、快速,具有较高的灵敏度和准确度,测定结果准确、可靠。
|
关 键 词: | 顶空 气质联用仪 水基胶 苯系物 |
Analysis of BTEX with HS-GC/MS in the Gluewater |
| |
Institution: | HUANG Hui-zhen et al(Technology Center of China Tobacco Fujian Industrial Corporation,Xiamen,Fujian 361022) |
| |
Abstract: | Objective] To determine the BTEX in gluewater.Method] Different pretreatment methods,solvents,the balance time and the balance temperature of headspace were compared.A method of GC/MS/SIM was used to to determine the contents of benzene,toluene,ethyl benzene,p-xylene,m-xylene and o-xylene in the gluewater.Result] N,N-dimethylformamide was the first solvent.Headspace was the best of all pretreatment methods,and the best balance time was 80 ℃,the best balance temperature was 15 min.The recovery of the method was from 96.96% to 105.19% with RSD of 1.082% to 3.288%,and the limits of detection was from 0.003 to 0.016 mg/kg.Conclusion] The HS-GC/MS method is simple and rapid with simple pretreatment,little pollution,high accuracy and sensitivity,its determination results are reliable and accurate. |
| |
Keywords: | Headspace(HS) GC/MS Gluewater BTEX |
本文献已被 CNKI 万方数据 等数据库收录! |
|