首页 | 本学科首页   官方微博 | 高级检索  
     检索      

甘蔗切割器不同形状刀片切割力的仿真分析
引用本文:林茂,符新,梁栋,罗洪峰.甘蔗切割器不同形状刀片切割力的仿真分析[J].西南农业学报,2011,24(2).
作者姓名:林茂  符新  梁栋  罗洪峰
作者单位:海南大学机电工程学院,海南儋州,571737
基金项目:海南省自然科学基金项目
摘    要:为了改善甘蔗切割器刀片切割甘蔗的质量及提高刀片的使用寿命,本文对单圆盘甘蔗切割器上采用的3种形状刀片建立切割器仿真模型,运用ANSYS有限元分析软件对刀片模型进行切割力仿真试验研究.以刀片节点变形量和应力值为判别指标,对试验数据进行处理、数理统计分析,建立影响刀片工作性能的多因素(刀片刃角、切割长度、节点位置)数学模型,在相同切割力作用下定性和定量分析不同形状刀片在不同位置下的变形量和应力值,通过优化分析,得出较优的形状刀片及结构参数.结果表明弯形刀片形状优于梯形和矩形刀片,机械强度较好,结构参数优化为刀片刃角15°,切割长度75mm,该研究结论对甘蔗收获机械的研发有重要的指导意义.

关 键 词:甘蔗  切割器  刀片  仿真试验

Simulation Analysis of Cutting Force on Different Shape Blades of Sugarcane Harvester
LIN Mao,FU Xin,LIANG Dong,LUO Hong-feng.Simulation Analysis of Cutting Force on Different Shape Blades of Sugarcane Harvester[J].Southwest China Journal of Agricultural Sciences,2011,24(2).
Authors:LIN Mao  FU Xin  LIANG Dong  LUO Hong-feng
Institution:LIN Mao,FU Xin,LIANG Dong,LUO Hong-feng (Hainan University College of Electrical and Mechanical Engineering,Hainan Danzhou 571737,China)
Abstract:In order to improve the cutting quality of sugarcane cutter and increase the service life of blades,a simulation model for single base cutter of sugarcane harvester was built with three shape blades.A simulation cutting force experiment was researched by using finite element analysis software ANSYS on the model.Through the experimental data processing and statistical analysis,the mathematical multi-factor(blade edge angle,cutting length,node location) model which affected the cutting performance,was establi...
Keywords:Sugar cane  Cutting equipment  Optimization  Simulation experiment  
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号