首页 | 本学科首页   官方微博 | 高级检索  
     检索      

粗皮枝木材热处理位置对吸热量及升温速度的影响
引用本文:王雪花,;费本华,;柴宇博,;刘君良.粗皮枝木材热处理位置对吸热量及升温速度的影响[J].浙江林学院学报,2014(5):745-750.
作者姓名:王雪花  ;费本华  ;柴宇博  ;刘君良
作者单位:[1]南京林业大学家具与工业设计学院,江苏南京210037; [2]国际竹藤中心,北京100102; [3]中国林业科学研究院木材工业研究所,北京100091
基金项目:国家自然科学基金资助项目(31370558)
摘    要:对粗皮桉Eucalyptus pellita木材采用辐射加热的方式进行真空热处理,研究处理温度及不同测试位置,包括板厚、长度及宽度位置因素,对木材板内单位质量吸热量(Qm)及平均升温速度(VTmean)的影响,用方差分析判定影响真空热处理过程的主要参数,以最小显著差法(LSD)多重比较分析其影响程度。结果表明:影响Qm及Ⅳ‰的主要因素为热处理温度及板材厚度,端距、侧距的影响不大;随热处理温度升高、板材厚度的增加,Qm及VTmean增大,当板材厚度差在20 mm以上时,Qm及VTmean在0.05水平上差异显著,采用真空热处理时需考虑由厚度造成的传热不均问题。若以吸热量衡量热处理效果,在120-240℃的温度段处理,可满足较广泛的热处理效果差异需求。图3表5参12

关 键 词:林业工程  粗皮桉木材  真空热处理

Effect of temperature and testing position to heat absorption and temperature increasing rate during Eucalyptus pellita wood heat treatment
Institution:WANG Xuehua, FEI Benhua, CHAI Yubo, LIU Junliang( 1. Collge of Furniture and Idustrial Design, Nanjing Forestry University-, Nanjing 210037, Jiangsu, China; 2. International Center of Bamboo and Rattan, Beijing 100102, China; 3. Research Institute of Wood Industry, Chinese Academy of Forestry, Beijing 100091, China)
Abstract:Eucalyptus pellita wood was radiation heated under different temperatures in vacuum condition. Ef- fect of different temperatures and testing positions, contains different wood board depths, lengths, and widths, to heat absorption per unit mass (Qm) and average temperature increasing rate (VTmean) were studied. Influence degree to 0m and VTmeanof the parameters were judged by analysis of covariance, and the degree of influence were weighed by LSD multiple comparisons. The results showed that: main factors which effecting VTmean and Qm during vacuum heat treatment were heat treatment temperature and testing board thickness, influence of dis- tance from test point to board top and side was quite limited; VTmean and Qm went up as heat treatment tempera- ture increasing and thickness enhancing, effect of depth increased significantly different at 0.05 levels when the depth difference reached up to 20 mm. The phenomenon of uneven heat transfer should to be taken into ac- count when the thickness of the treating board was more than 40 ram. Ch, 3 fig. 5 tab. 12 ref]
Keywords:forest engineering  Eucalyptus pellita wood  vacuum heat treatment  testing position  heat ab-sorption per unit mass  average temperature increasing rate
本文献已被 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号