Feasibility of using FGD gypsum to conserve water and reduce erosion from an agricultural soil in Georgia

Crop production in Georgia and the Southeastern U.S. can be limited by water. Highly-weathered, drought-prone soils are susceptible to runoff and erosion. Rainfall patterns generate runoff producing storms followed by extended periods of drought during the crop growing season. Thus, supplemental irrigation is often needed to sustain profitable crop production. Increased water retention and soil conservation would efficiently improve water use and reduce irrigation amounts/costs and sedimentation, and sustain productive farm land, thus improving producer's profit margin. Soil amendments, such as flue gas desulfurization (FGD) gypsum, have been shown to retain rainfall and/or irrigation water through increased infiltration while decreasing runoff (R) and sediment (E). Objectives were to quantify rainfall partitioning and sediment delivery improvements with surface applied FGD gypsum from an Ultisol managed to conventional till (CT) and to assess the feasibility of using FGD gypsum on agricultural land in southern Georgia. A field study (Faceville loamy sand, Typic Kandiudult) was established (2006, 2007) near Dawson, GA managed to CT, irrigated cotton (Gossypium hirsutum L.). FGD gypsum application rates evaluated were 0, 1.1, 2.2, 4.5, and 9 Mg ha^− 1. Gypsum treatments and simulated rainfall (50 mm h^− 1 for 1 h) were applied to 2-m wide × 3-m long field plots (n = 3). Runoff and E were measured from each 6-m² plot (slope = 1%). FGD gypsum plots averaged 26% more infiltration (INF), 40% less R, 58% less E, 27% lower maximum R rates (R_max), and 2 times lower maximum E rates (E_max) than control plots. Values of INF and water for crop use increased, and R, E, R_max, and E_max decreased as FGD gypsum application rate increased. Values of INF, R, E, R_max, and E_max for 9 Mg ha^− 1 plots were as much as 17% greater, 35% less, 1.9 times less, 35% less, and 1.9 times less than those from other FGD gypsum plots, respectively; and 40% greater, 40% less, 2.2 times less, 52% less, and 2.9 times less than those from control plots, respectively. Applying FGD gypsum to agricultural lands is a cost-effective management practice for producers in Georgia that beneficially impacts natural resource conservation, producer profit margins, and environmental quality. Agriculture in the Southeast provides a viable market for the electric power industry to convert disposal costs of FGD gypsum into a profitable commodity.