| 中国林蛙饵料仿生诱喂装置的研制（简报） |
| |
| 引用本文： | 史晓敏,张艳春,计青山,石 戈.中国林蛙饵料仿生诱喂装置的研制（简报）[J].农业工程学报,2009,25(2):104-106. |
| |
| 作者姓名： | 史晓敏 张艳春 计青山 石 戈 |
| |
| 作者单位： | 浙江海洋学院机电工程学院，舟山 316004;浙江海洋学院机电工程学院，舟山 316004;浙江海洋学院机电工程学院，舟山 316004;浙江海洋学院海洋科学学院，舟山 316004 |
| |
| 基金项目： | 浙江省重点科技项目资助（2007C22033）；舟山市科技计划项目（2006008） |
| |
| 摘 要： | 为了实现中国林蛙工厂化养殖，降低养殖成本和养殖风险、改善养殖环境、提高林蛙的蛙油品质，设计研制了饵料仿生诱喂装置，对几种理论可行的装置方案进行试制和初步试验，确定了3轴不同相位凸轮传动的最佳方案，根据最佳方案设计和制作了样机并进行了林蛙取食试验，所设计的装置占用蛙池面积仅为每池0.48 m2，该装置制造成本低、操作简单，林蛙取食率最高达到了79.2%。试验结果表明：装置所产生的饵料仿生蠕动能够满足中国林蛙取食要求，取得了满意的结果。
|
| 关 键 词： | 运动仿生，凸轮机构，饲喂装置，中国林蛙 |
| 收稿时间： | 2008/1/23 0:00:00 |
| 修稿时间： | 2008/10/9 0:00:00 |
Development of bait motion bionics feeding equipment of
Rana chensinensis |
| |
| Shi Xiaomin,Zhang Yanchun,Ji Qingshan and Shi Ge.Development of bait motion bionics feeding equipment of
Rana chensinensis[J].Transactions of the Chinese Society of Agricultural Engineering,2009,25(2):104-106. |
| |
| Authors: | Shi Xiaomin Zhang Yanchun Ji Qingshan and Shi Ge |
| |
| Institution: | 1. School of Electrical and Mechanical Engineering, Zhejiang Ocean University, Zhoushan 316004, China,1. School of Electrical and Mechanical Engineering, Zhejiang Ocean University, Zhoushan 316004, China,1. School of Electrical and Mechanical Engineering, Zhejiang Ocean University, Zhoushan 316004, China and 2. School of Marine Science, Zhejiang Ocean University, Zhoushan 316004, China |
| |
| Abstract: | The bait simulating tempting feeding equipment was designed for factory breeding of rana chensinensis, which were to decrease its cost and risk and improve breeding environment. According to pre-arranged plannings and preparatory experiment, three axial cam driving of distinct phases was determined to be the best project. According to the best project, model machine was designed and made, and feeding experiments were carried out. The equipment only covers an area of 0.48 m2 in every pond, and it has characteristics of low cost and easy operation. The maximal rate of rana chensinensis feeding attained 79.2%. Results indicated that the bait motion bionics from the equipment can meet rana chensinensis feeding requirement, which achieved satisfactory effect. |
| |
| Keywords: | motion bionics cam mechanisms feeding equipments rana chensinensis |
|
| 点击此处可从《农业工程学报》浏览原始摘要信息 |
| 点击此处可从《农业工程学报》下载免费的PDF全文 |
|
