首页 | 本学科首页   官方微博 | 高级检索  
     检索      

排气催化转化器气流分布的数值模拟和试验
引用本文:刘军,苏清祖.排气催化转化器气流分布的数值模拟和试验[J].农业工程学报,2003,19(1):95-98.
作者姓名:刘军  苏清祖
作者单位:江苏大学;江苏大学
基金项目:江苏省科技厅资助项目(BS97017)
摘    要:运用计算流体动力学对汽车排气催化转化器气流特性开展数值模拟。对4种不同的催化转化器结构的气流特性和压力损失特性进行对比,采用平滑过渡的引流结构,压力损失最小。对不同排气流速的气流场分布和压力损失进行了模拟和分析。研究表明排气流经催化转化器的压力损失主要是由排气流进和流出载体通道时产生的,由于载体通道入口对气流的阻碍作用,使得气体流入载体各通道的流速趋向一致。通过试验证明采用计算流体动力学开展催化转化器气流分布、压力损失的优化是可行的。

关 键 词:催化转化器    计算流体动力学    排气    数值模拟
文章编号:1002-6819(2003)01-0095-04
收稿时间:2002/3/13 0:00:00
修稿时间:2002年3月13日

Numerical simulation and testing research on flow distribution in catalytic converter
Liu Jun and Su Qingzu.Numerical simulation and testing research on flow distribution in catalytic converter[J].Transactions of the Chinese Society of Agricultural Engineering,2003,19(1):95-98.
Authors:Liu Jun and Su Qingzu
Abstract:Computer fluid dynamics(CFD) is adopted to simulate the flow fields of a catalytic converter while researching the working process of an emission postprocessor. The velocity field and pressure field of exhaust gas are obtained. Methods of structural optimization of catalytic converter for improving gas flow and conversion efficiency are proposed. The pressure loss of catalytic converter is caused mainly at the locations of inlets and outlets of monoliths, and flow distribuation in the catalyst is almost flat due to honeycomb resistance. The results are verified by experiment.
Keywords:catalytic converter  computer fluid dynamics  emission  numerical simulation
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《农业工程学报》浏览原始摘要信息
点击此处可从《农业工程学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号