首页 | 本学科首页   官方微博 | 高级检索  
     检索      

杂交水稻制种气力授粉的参数试验及优化
引用本文:王慧敏,汤楚宙,李中秋,李 明,黄 震,方诗伦.杂交水稻制种气力授粉的参数试验及优化[J].农业工程学报,2012,28(26):101-106.
作者姓名:王慧敏  汤楚宙  李中秋  李 明  黄 震  方诗伦
作者单位:1. 湖南农业大学工学院,长沙 410128;1. 湖南农业大学工学院,长沙 410129 2. 湖南省现代农业装备工程技术研究中心,长沙 410128;1. 湖南农业大学工学院,长沙 410130;1. 湖南农业大学工学院,长沙 410131 2. 湖南省现代农业装备工程技术研究中心,长沙 410128;1. 湖南农业大学工学院,长沙 410132;1. 湖南农业大学工学院,长沙 410133
基金项目:lliance project of Hunan Science and Technology Agency (2010xk6001)
摘    要:摘要:为研究各作用因素对杂交水稻制种气力授粉效果的影响,该文设计了气力授粉试验装置,应用二次正交旋转试验设计方法,研究气流速度、作用位置和作用角度对花粉有效分布面积比率、花粉平均分布密度以及花粉分布不均匀度的影响。通过Design-Expert8.05数据处理系统建立3个因素对各指标影响的回归方程,进一步优化,得到最佳授粉效果的参数组合为:气流速度21.98 m/s,作用位置为穗顶以下16.85 cm,作用角度为0。此时,花粉有效分布面积率为88.75%,单视野花粉平均密度为4.50粒,花粉分布不均匀度为19.53,授粉效果综合评价指数为最大值0.744。该结果为研究杂交水稻气力式授粉技术及研制气力式授粉装备提供理论依据。

关 键 词:农业机械,优化,速度,杂交水稻,制种,授粉,影响因素
收稿时间:2012/6/17 0:00:00
修稿时间:2012/9/13 0:00:00

Experiment and optimization of parameters for pneumatic pollination in hybrid rice breeding
Wang Huimin,Tang Chuzhou,Li Zhongqiu,Li Ming,Huang Zhen and Fang Shiluen.Experiment and optimization of parameters for pneumatic pollination in hybrid rice breeding[J].Transactions of the Chinese Society of Agricultural Engineering,2012,28(26):101-106.
Authors:Wang Huimin  Tang Chuzhou  Li Zhongqiu  Li Ming  Huang Zhen and Fang Shiluen
Abstract:In order to study the effect of airflow speed, affection position and affection angle on pneumatic pollination in hybrid rice breeding, test apparatus and experiments were designed and carried out in this paper. Effect of the three factors on effective area ratio, average density and non-uniformity of pollens distribution were analyzed through orthogonal rotational quadratic combination test method, and then regression equations to describe the relationship of factors and each assessment index were established with Design-Expert8.05 data. An optimum combination of input parameters was obtained with airflow speed 21.98 m/s, affection position 16.85 cm below panicle, and affection angle 0. Effective area ratio was 88.75%, average density was 4.50 per single field, non-uniform distribution was 19.53, and the maximum desirability was 0.744. This result provides a theoretical basis for studying pneumatic pollination technology and developing pneumatic pollination equipment for hybrid rice breeding.
Keywords:agricultural machinery  optimization  speed  hybrid rice  breeding  pollination  influencing factors
点击此处可从《农业工程学报》浏览原始摘要信息
点击此处可从《农业工程学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号