| 不同影响因子对三聚氰胺甲醛树脂模塑料的影响 |
| |
| 引用本文： | 赵 恒,张双保,刘贤淼,等.不同影响因子对三聚氰胺甲醛树脂模塑料的影响[J].林业机械与木工设备,2014(2):47-48,51. |
| |
| 作者姓名： | 赵 恒 张双保 刘贤淼 等 |
| |
| 作者单位： | [1]北京林业大学材料科学与技术学院,北京100083 [2]国际竹藤中心,北京100102 |
| |
| 基金项目： | “十二五”科技支撑“竹材制浆造纸过程术质纤维素类剩余物资源化利用技术”项目（2012BAD23B0203） |
| |
| 摘 要： | 研究不同影响因素（竹粉比例、干燥时间、NaOH浓度、模塑粉细度）对三聚氰胺甲醛树脂模塑料的影响，通过测试力学性能、流动性、挥发分、模塑收缩率、耐沸水性、吸水性，得出竹粉比例为50%、干燥时间6h、NaOH浓度10%、模塑粉细度100目时，制得的试件性能较好。
|
| 关 键 词： | 三聚氰胺甲醛树脂模塑料 竹粉比例 干燥时间 NaOH浓度 模塑粉细度 |
Effect of Different Influential Factors on Melamine Formaldehyde Moulding Plastic |
| |
| ZHAO Heng,ZHANG Shuang-bao,LIU Xian-miao,LIU Xiang,LI Wen-yan.Effect of Different Influential Factors on Melamine Formaldehyde Moulding Plastic[J].Forestry Machinery & Woodworking Equipment,2014(2):47-48,51. |
| |
| Authors: | ZHAO Heng ZHANG Shuang-bao LIU Xian-miao LIU Xiang LI Wen-yan |
| |
| Institution: | 1.School of Materials Science and Technology, Beijing Forestry University, Beijing 100083, China; 2.International Center for Bamboo and Rattan, Beijing 100102, China) |
| |
| Abstract: | The effect of different influential factors （bamboo powder ratio, drying time, NaOH density, fineness of moulding powder） on melamine formaldehyde moulding materials is studied. The test of mechanical property, fluidity, volatile component, shrinking percentage, boiling water resistance and water-absorbing quality shows that the test piece can obtain good performance in the case of 50%bamboo powder ratio, 6-hour drying time, 10%NaOH density and 100-mesh power fineness. |
| |
| Keywords: | melamine formaldehyde moulding plastic bamboo powder ratio drying time NaOH density fineness of moulding powder |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
