| Abstract: | Abstract Joints are generally the weakest part of furniture and they are primary cause of failure. To ensure durability and performance of furniture, it is important for a designer to understand the stresses acting on the joints for preparing suitable design and specification of a furniture. Since each type of joint is unique in construction, it is important to know their strength, when subjected to various stresses namely shear, bending, and tensile, by testing the joints. Since there is no established test method for joints, this study was carried out to categorize joints based on their shape, identify the stresses acting over them and develop test methods for testing furniture joints in three modes namely shear, bending, and tension, which are required for designing joints of any furniture and also provide means of comparing strength of different types of joints. Different types of furniture joints were taken for the study and were classified based on their shapes such as L-shaped, T-shaped, straight, and corner joints. Six types of jigs (one type for bending, two types for shear, and three types for tension) were designed and developed for testing the joints, in such a way that any type of joint can be tested in three modes, i.e., bending, shear, and tension using a universal testing machine. The criteria for section of jigs for performing tests on joints, based on their shape and stresses acting on a particular joint, were reported. Tests were carried out using all the six type of jigs to check the suitability of jigs and test methods developed in the study. |
