| 耐磨三聚氰胺甲醛树脂的制备及性能表征 |
| |
| 引用本文： | 陈奶荣,曾月鸿,林巧佳,饶久平,曾钦志.耐磨三聚氰胺甲醛树脂的制备及性能表征[J].福建农林大学学报(自然科学版),2013,42(3). |
| |
| 作者姓名： | 陈奶荣 曾月鸿 林巧佳 饶久平 曾钦志 |
| |
| 作者单位： | 福建农林大学材料工程学院,福建福州,350002 |
| |
| 基金项目： | 国家自然科学基金资助项目，福建省林业厅资助项目，国家科技部农业科技成果转化资金资助项目，福建省科技厅重大专项资助项目 |
| |
| 摘 要： | 采用超声波法将5种纳米耐磨材料分散于三聚氰胺甲醛树脂(MF树脂),制备浸渍装饰纸层压板;并采用傅里叶变换红外光谱法和差示扫描量热法等对改性的MF树脂进行分析.结果表明:分散4次最合适;MF树脂最低耐磨转数为1600转,最高耐磨转数为2500转;耐磨材料的加入使得MF树脂的粘度、接触角增大,耐磨性能提高.
|
| 关 键 词： | 三聚氰胺甲醛树脂 纳米无机物 耐磨 |
Preparation and characterization of wear-resistant melamine-formaldehyde resin |
| |
| CHEN Nai-rong
,
ZENG Yue-hong
,
LIN Qiao-jia
,
RAO Jiu-ping
,
ZENG Qin-zhi.Preparation and characterization of wear-resistant melamine-formaldehyde resin[J].Journal of Fujian Agricultural and Forestry University,2013,42(3). |
| |
| Authors: | CHEN Nai-rong ZENG Yue-hong LIN Qiao-jia RAO Jiu-ping ZENG Qin-zhi |
| |
| Abstract: | Five kinds of wear-resistant nano-materials were dispersed into melamine-formaldehyde resin(MF resin) by ultrasonic wave for preparing laminate flooring;the wear-resistance of MF resins was analyzed by Fourier transform infrared spectroscopy(FTIR) and differential scanning calorimetery(DSC).The results were as follows: the most suitable dispersing cycles was four;the lowest and the best wearing resistances of wear-resistant MF resin were 1600 and 2500 revolutions,respectively;the viscosity,contact angle and wearing resistance increased by adding wear-resistant materials. |
| |
| Keywords: | melamine-formaldehyde resin nano inorganic material wearing resistance |
| 本文献已被 万方数据 等数据库收录！ |
|
