首页 | 本学科首页   官方微博 | 高级检索  
     检索      

点刹递进式棉包缠膜系统设计与试验
引用本文:赵亚宁,郝付平,韩树杰,韩科立,冯小川,黄涛.点刹递进式棉包缠膜系统设计与试验[J].农业机械学报,2023,54(S2):173-180.
作者姓名:赵亚宁  郝付平  韩树杰  韩科立  冯小川  黄涛
作者单位:中国农业机械化科学研究院集团有限公司
基金项目:国家重点研发计划项目(2022YFD2002402)
摘    要:针对国产圆包式采棉机棉包缠膜技术理论研究不足,存在送膜不畅、包边效果不好等问题,设计了一种点刹递进式棉包缠膜系统,主要由送膜机构、点刹拉紧机构和控制单元组成。通过研究棉包点刹拉紧缠膜机理,理论分析了送膜的必要条件、导向器上膜成功的有效区域、以及棉包端部包边形成的边界条件,确定了影响点刹递进式棉包缠膜系统作业性能的主要因素为打包带速度、点刹周期、制动时间与进膜时间比值(制动比),以平均棉包包边宽度、平均棉包密度为试验指标开展了三因素三水平二次回归响应面试验,建立了回归模型,分析各因素对棉包缠膜系统作业性能的影响,得到了点刹递进式棉包缠膜系统最佳工作参数为:打包带速度156 r/min,点刹周期1 200 ms,制动比为1.2,以此参数组合进行验证试验,得到棉包的平均包边宽度为160 mm,平均棉包密度193 kg/m3,试验结果与理论优化值相差不超过5%。

关 键 词:圆型棉包  缠膜系统  点刹过程  参数优化
收稿时间:2023/6/25 0:00:00

Design and Experiment of Point-braking Type Film Wrapping System of Round Baler Cotton Picker
ZHAO Yaning,HAO Fuping,HAN Shujie,HAN Keli,FENG Xiaochuan,HUANG Tao.Design and Experiment of Point-braking Type Film Wrapping System of Round Baler Cotton Picker[J].Transactions of the Chinese Society of Agricultural Machinery,2023,54(S2):173-180.
Authors:ZHAO Yaning  HAO Fuping  HAN Shujie  HAN Keli  FENG Xiaochuan  HUANG Tao
Institution:Chinese Academy of Agricultural Mechanization Sciences Group Co., Ltd.
Abstract:In view of the insufficient theoretical research on the existing cotton bale wrapping technology and the issues include frequent blockage in the film feeding process and poor edging effect in domestic round baler cotton picker, a point-braking type film wrapping system was designed. The system mainly consisted of film feeding device, point-braking tensioning device, and control unit. By studying the film wrapping mechanism of cotton round bales, the necessary conditions for film feeding, the effective area of successful film feeding on the guide device, and the boundary conditions for the formation of edge wrapping at the ends of the cotton package were theoretically analyzed. A three-factors, three-levels quadratic regression orthogonal test was conducted with packing belt speed, point-braking cycle, the ratio of braking time to film feeding time (referred to as the braking ratio) as the test factors, and the average edge width of the cotton package and the average cotton bale density as the test indexes. A regression model was established to analyze the impact of each factor on the film wrapping system. The optimized working parameters was as follows: packing belt speed of 156r/min, point-braking cycle of 1200ms and braking ratio of 1.2. The combination of these parameters was tested in the field, the average edge width was 160mm and the average cotton bale density was 193kg/m3. The experimental results differed from the theoretically optimized values by less than 5%. The research results can provide reference for the design of cotton packaging and harvesting machinery.
Keywords:round cotton bale  film wrapping system  point-braking process  parameter optimization
点击此处可从《农业机械学报》浏览原始摘要信息
点击此处可从《农业机械学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号