| 基于PRO/E和ADAMS的伐区剩余物压缩装置的设计 |
| |
| 引用本文： | 董希斌,周云飞.基于PRO/E和ADAMS的伐区剩余物压缩装置的设计[J].森林工程,2010,26(5):28-31. |
| |
| 作者姓名： | 董希斌 周云飞 |
| |
| 作者单位： | 东北林业大学,哈尔滨150040 |
| |
| 摘 要： | 利用PRO/ENGINEER软件绘制出直观的三维立体模型。将PRO/ENGINEER模型导入到ADAMS中,建立齿轮啮合力仿真模型。利用ADAMS对模型进行动力学仿真,得出速度、转矩和啮合力曲线。通过对仿真结果进行分析,在理论上确保传动机构的可行性和合理性,为压缩装置各项运动参数和结构参数的优化设计提供依据。
|
| 关 键 词： | 伐区剩余物 压缩装置 PRO/E ADAMS |
Design on the Compression Equipment of Cutting Residuals Based on PRO/E and ADAMS |
| |
| Dong Xibin,Zhou Yunfei.Design on the Compression Equipment of Cutting Residuals Based on PRO/E and ADAMS[J].Forest Engineering,2010,26(5):28-31. |
| |
| Authors: | Dong Xibin Zhou Yunfei |
| |
| Institution: | (Northeast Forestry University,Harbin 150040) |
| |
| Abstract: | Through importing the direct three-dimensional model drawn by Pro/Engineer software into ADAMS,the simulation model of gear engaging force was established.The curves of speed,torque and engaging force were obtained through dynamic simulation of the model with ADAMS.Based on the analysis of simulation results,the feasibility and rationality of the transmission mechanism was assured in theory,which would provide basis for the optimized design in selecting the motion parameters and structure parameters of the compression machine. |
| |
| Keywords: | cutting residuals compression equipment PRO/E ADAMS |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
