| Abstract: | The saturated and near‐saturated hydraulic conductivity of soils, ku, is a sensitive indicator of soil structure and a key parameter for solute transport and soil aeration. In this contribution, we present and numerically investigate a double‐disk method to determine ku in the laboratory by steady‐state percolation at different suction steps. Tension infiltration of water takes place at the top of a soil column through a porous disk with a smaller diameter than the soil sample. This leaves part of the soil surface open and ensures a proper soil ventilation. Drainage takes place at the base through a porous disk with the full diameter of the soil column at exactly the same tension as applied to the top boundary. Since the infiltration area is less than the percolation area, the water flow diverges and the equality of steady flow rate and hydraulic conductivity, which characterizes the standard unit‐gradient experiment, is no longer valid. To develop a general relationship between observed steady flow rate and unsaturated hydraulic conductivity, the experiment was simulated with the Richards‐equation solver HYDRUS 2D/3D, for twelve different soil classes. We found for tensions in the range 1 cm < 10 cm, an infiltration disk diameter of 4.5 cm diameter and a sample diameter of 8 cm diameter that the flux rate at any given tension was about 0.7 times the respective hydraulic conductivity, with an error of less than 10%. |
