| 薄型竹丝刨花板生产工艺初探 |
| |
| 引用本文： | 李宁,蒋汇川,李童,罗建举.薄型竹丝刨花板生产工艺初探[J].林产工业,2010,37(3). |
| |
| 作者姓名： | 李宁 蒋汇川 李童 罗建举 |
| |
| 作者单位： | 1. 广西大学林学院,南宁,530005
2. 广西派阳山林场,宁明,532500 |
| |
| 摘 要： | 以毛竹竹丝为原料,探讨了3mm薄型竹丝刨花板的生产工艺。采用正交试验方法,分析了板坯密度、热压温度、热压时间和施胶量对薄型竹丝刨花板性能的影响。试验结果表明,板坯密度和施胶量对板材的主要性能影响显著,而热压温度和热压时间无显著影响。本研究为薄型竹丝刨花板生产制定的生产工艺参数为:板坯密度0.65g/cm~3,热压时间6min,热压温度130℃,施胶量10%。
|
| 关 键 词： | 竹丝板 薄型刨花板 制造工艺 |
Preliminary Study on Technology for Thin Bamboo Wool Board Manufacture |
| |
| LI Ning,JIANG Hui-chuan,LI Tong,LUO Jian-ju.Preliminary Study on Technology for Thin Bamboo Wool Board Manufacture[J].China Forest Products Industry,2010,37(3). |
| |
| Authors: | LI Ning JIANG Hui-chuan LI Tong LUO Jian-ju |
| |
| Institution: | 1.Forestry College of Guangxi University/a>;Nanning 530005/a>;China 2.Guangxi Paiyangshan Forest Farm/a>;Ningming 532500/a>;China |
| |
| Abstract: | Technology for 3mm thick bamboo wool board manufacture was studied,and the effects of board density,hot-pressing time,hot-pressing temperature and adhesive consumption on properties of the board were discussed through an orthogonal experiment.The results showed that board density and adhesive consumption had significant effects on board properties,but hot-pressing time and temperature had no significant effect. The optimum technology parameters for 3mm thick bamboo wool board were as follows:board density o... |
| |
| Keywords: | Bamboo wool board Thin particleboard Manufacturing technology |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
