Comparison of internal bond strength and compression shear strength of wood-based materials |
| |
Authors: | Song-Yung Wang Tsai-Yung Chen Jann-Der Fann |
| |
Institution: | (1) Department of Forestry, College of Agriculture, National Taiwan University, No.1. Sect. 4, Roosevelt Road, Taipei, Taiwan, ROC;(2) Department of Forestry, College of Agriculture, National Chung Hsing University, Taichung, Taiwan, ROC |
| |
Abstract: | The purpose of this study was to design a compression shear device for easy and fast measurement of the bonded shear strength of wood-based materials to replace the conventional method used to evaluate internal bond strength (IB). To assess the performance of this device, five differently sized specimens, included group I (dimension 5 × 1 cm), group II (5 × 2 cm), group III (5 × 3 cm), group IV (5 × 4 cm), and group V (5 × 5 cm) cut from commercial particleboard and medium-density fiberboard (MDF) (1.8 cm thick) were tested in compression shear. Only group V (5 × 5 cm) was prepared for the IB test. Results indicated that the compression shear strengths (CS) of particleboard and MDF, loaded in the horizontal or the diagonal direction, were greater than the IB, although a significant correlation existed between the two. This finding suggests that the IB of particleboard and MDF could be accurately estimated from the data collected by the CS test.Part of this report was presented at the Third Pacific Rim Bio-based Composites Symposium, Kyoto, December 2–5, 1996 |
| |
Keywords: | Compression shear device Internal bond strength Compression shear strength Particleboard Medium-density fiberboard |
本文献已被 SpringerLink 等数据库收录! |
|