首页 | 本学科首页   官方微博 | 高级检索  
     检索      

凯斯A8000甘蔗联合收割机切割质量影响因素的试验
引用本文:杨望,王二朋,杨坚,李杨,黄深闯,梁兆新.凯斯A8000甘蔗联合收割机切割质量影响因素的试验[J].农机化研究,2017(5):192-196.
作者姓名:杨望  王二朋  杨坚  李杨  黄深闯  梁兆新
作者单位:1. 广西大学 机械工程学院,南宁 530004; 广西蔗糖产业协同创新中心,南宁 530004;2. 广西大学 机械工程学院,南宁,530004;3. 广西蔗糖产业协同创新中心,南宁,530004
基金项目:国家自然科学基金项目(51565003);广西自然科学基金项目(2014GXNSFBA118279);广西教育厅高校科研项目(YB 2014002);广西大学青年博士科研启动基金项目(XBZ160111)
摘    要:针对凯斯A8000甘蔗联合收获机实际操作参数对切割质量影响大的问题,采用二次回归通用旋转组合设计和田间物理试验方法,对其切割质量影响因素(实际操作参数)进行了研究,探明了各影响因素对切割质量的影响规律和影响机理,且优化了影响因素。结果表明:随刀盘转速x1增大,甘蔗破头率先减小后增大,随前进速度x2的增大,甘蔗破头率y增大;使用大的刀盘倾角时,小深度的入土切割有利于降低甘蔗破头率,但采用大深度的入土切割,甘蔗破头率增大;使用小的刀盘倾角时,贴地切割对降低甘蔗破头率最有利。使用小的刀盘倾角时,因素优组合为:刀盘转速为516.4r/min,前进速度为4km/h,刀盘的离地高度为0,相应可靠性为99%的甘蔗破头率预测区间为(3.9%~8.12%)。使用大的刀盘倾角时,因素优组合为:刀盘转速为544r/min,前进速度为4km/h,刀盘的离地高度为-2.78cm,相应可靠性为99%的甘蔗破头率预测区间为(5.85%~9.34%)。

关 键 词:甘蔗  联合收获机  切割质量  影响规律  因素优化

Test on Influencing Factors of Cutting Sugarcane Quality of Case A8000 Sugarcane Combine Harvester
Yang Wang,Wang Erpeng,Yang Jian,Li Yang,Huang Shenchuang,Liang Zhaoxin.Test on Influencing Factors of Cutting Sugarcane Quality of Case A8000 Sugarcane Combine Harvester[J].Journal of Agricultural Mechanization Research,2017(5):192-196.
Authors:Yang Wang  Wang Erpeng  Yang Jian  Li Yang  Huang Shenchuang  Liang Zhaoxin
Abstract:Due to the large effect of actual operating parameters of Case A 8000 sugarcane combine harvester on cutting sugarcane quality , the affecting factors of cutting quality ( the actual operating parameters ) are studied by quadratic re-gression general rotational combination design and field physical test method .The influencing law and mechanism of influ-ence factors on cutting quality were discovered ,and then the influence factors were optimized .Results show that with the increasing of cutter speed ,the broken biennial root rate of sugarcane increase first and then decrease .With the increasing of forward speed ,the broken biennial root rate of sugarcane increase .When cutter inclination is large , sugarcane cutting beneath surface soil which the cutting depth is small is beneficial to decrease the broken biennial root rate of sugarcane , but the rate increased when the cutting depth is large .When cutter inclination is small , sugarcane ground cutting is bene-ficial to decrease the broken biennial root rate of sugarcane .When cutter inclination is small , optimal combination of op-erating parameters is as followed:rotating speed of cutter is 516.4 RPM,forward speed is 4 km/h,height of cutter above ground is 0 ,prediction interval of the broken biennial root rate of sugarcane which has 99% reliability is 3 .9% ~8 . 12%.When cutter inclination is large , optimal combination of operating parameters is as followed:rotating speed of cut-ter is 544 RPM,forward speed is 4 km/h, height of cutter above ground is -2.78cm,prediction interval of the broken bi-ennial root rate of sugarcane which has 99% reliability is 5.85% ~9.34%.
Keywords:sugarcane  harvester  cutting quality  influencing law  factor optimization
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号