| 竹丝模压刨花板的工艺优化研究 |
| |
| 引用本文： | 李权,唐贤明,李宁,项舟洋,张惠敏,罗建举.竹丝模压刨花板的工艺优化研究[J].广西林业科学,2009,38(1). |
| |
| 作者姓名： | 李权 唐贤明 李宁 项舟洋 张惠敏 罗建举 |
| |
| 作者单位： | 1. 广西大学林学院,南宁,530005
2. 浙江林学院,浙江临安,311300 |
| |
| 基金项目： | 广西壮族自治区研究生教育创新计划项目 |
| |
| 摘 要： | 采用正交试验法对竹丝模压刨花板制造工艺与产品质量进行优化试验,探讨施胶量、热压温度、热压时间、板坯含水率工艺因素对竹丝模压刨花板物理力学性能的影响,并得到了较优的工艺参数.试验结果表明利用纤维状竹丝可以压制出高质量的竹丝模压刨花板.产品的主要物理力学性能为:密度0.8 g/cm3,弹性模量6 745.7 MPa,静曲强度54.39 MPa,内结合强度0.53 MPa,吸水厚度膨胀率11.3%.
|
| 关 键 词： | 竹丝模压刨花板 工艺优化 |
Study on Technology Optimization for the Manufacture of Molded panel with Bamboo Strands |
| |
| LI Quan,TANG Xian-ming,LI Ning,XIANG Zhou-yang,ZHANG Hui-min,LUO Jian-ju.Study on Technology Optimization for the Manufacture of Molded panel with Bamboo Strands[J].Guangxi Forestry Science,2009,38(1). |
| |
| Authors: | LI Quan TANG Xian-ming LI Ning XIANG Zhou-yang ZHANG Hui-min LUO Jian-ju |
| |
| Institution: | 1.Forestry College of Guangxi University;Nanning 530005;China;2.Zhejiang Forestry University;Lin'an 311300;Zhejiang;China |
| |
| Abstract: | With orthogonal test method,an experiment was carried out in this study to optimize the manufacturing technology and product quality.Effects of glue consumption,hot-pressing temperature,hot-pressing time and the mat moisture content upon the physical-mechanical properties of the manufactured products were discussed in detail,and a set of optimum technical parameters were obtained. Results showed that molded panels of high quality could be manufactured with bamboo strands.The main physical-mechanical propert... |
| |
| Keywords: | molded panel of bamboo strands orthogonal test technology optimization |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
