| 刷镀工艺参数对中性高速铁镀层性能的影响 |
| |
| 引用本文： | 于喜亮,李桓,朱复谦,唐建军,黎悠麟.刷镀工艺参数对中性高速铁镀层性能的影响[J].广西农业生物科学,1992(2). |
| |
| 作者姓名： | 于喜亮 李桓 朱复谦 唐建军 黎悠麟 |
| |
| 作者单位： | 广西农学学院农业工程系，广西农学学院农业工程系，广西农学学院农业工程系，广西农学学院农业工程系，广西农学学院农业工程系 |
| |
| 摘 要： | 本文采用正交试验法探讨了中性高速铁刷镀工艺参数对镀层性能的影响。结果表明,工作电压对铁刷镀层的耐磨性、硬度影响最为显著;并获得最佳刷镀工艺规范为:工作电压10 V,相对速度18 m/min,起始温度常温,用 THY101镀液打底。
|
| 关 键 词： | 刷镀 覆层 中性高速铁 硬度 抗磨性 |
THE EFFECT OF TECHNICAL PARAMETERS OF BRUSH PLATING ON THE COATING'S PROPERTIES OF NEUTRAL HIGH-SPEED IRON |
| |
| Yu Xiliang Li Huan Zhu Fuqian Tang Jianjun Li Youlin.THE EFFECT OF TECHNICAL PARAMETERS OF BRUSH PLATING ON THE COATING''''S PROPERTIES OF NEUTRAL HIGH-SPEED IRON[J].Journal of Guangxi Agricultural and Biological Science,1992(2). |
| |
| Authors: | Yu Xiliang Li Huan Zhu Fuqian Tang Jianjun Li Youlin |
| |
| Institution: | Dept.of Agricultural Engineering |
| |
| Abstract: | In this paper,the effect of technical parameters of brush plating of neutral high-speed iron on the coating's properties is discussed by means of the orthogonal test.The results show that the effect of work voltage on the wear resistance and the hardness of iron brush coating is themost outstanding,and the best process parameters obtained are work voltage of 10 V,relative velocity of 18 m/min,starting at room temperature,THY101 as a basis of the coating. |
| |
| Keywords: | brush plating coating neutral high-speed iron hardness abrasion resistance |
| 本文献已被 CNKI 等数据库收录！ |
