Micromechanics of wood subjected to axial tension

Summary The behaviour of a small group of wood fibers of Sitka spruce during tensile loading is investigated. The load-extension curves for both early and late wood fibers consist of three distinct segments. The first segment is almost a straight line, at some stage of loading a yield point is observed. Beyond this point the specimen becomes less stiff and undergoes a large, mainly irreversible deformation. As the load is increased further, the curve exhibits the third segment showed by a significant change in slope. These curves look different from those obtained on thick specimens. In this respect, the behaviour of a thin wood specimen subjected to cyclic type tensile loading along its longitudinal direction is also illustrated. Based on wood microstructure, a model is presented to interpret the evolution of the Young's modulus of a wood fiber during tensile loading. The model considers wood as an assembly of cylindrical fibers pasted together in a longitudinal direction. We have assumed the cell wall to comprise only an S₂ layer made of a composite material consisting of a lignin and hemicellulose matrix reinforced by helical microfibrils along the fiber. Furthermore, it is assumed that the microfibril angle a in the S₂ layer is not uniform along the fiber axis and matrix degradation occurs in the zones where the microfibril angles are bigger. The validity of this assumption is verified by using holographic interferometry to visualize the displacement field of the specimen's surface under tension.The work reported in this paper is supported by a grant from the Swiss National Science Foundation, and its support is gratefully acknowledged