首页 | 本学科首页   官方微博 | 高级检索  
     检索      

4UFD-1400A1型薯类联合收获机提升装置运动分析与仿真
引用本文:刘 星,魏宏安,杨小平,李彦晶,孙广辉,胡 忠强,史明明.4UFD-1400A1型薯类联合收获机提升装置运动分析与仿真[J].上海交通大学学报(农业科学版),2013(5):264-268.
作者姓名:刘 星  魏宏安  杨小平  李彦晶  孙广辉  胡 忠强  史明明
作者单位:(1.甘肃农业大学工学院, 甘肃 兰州 730070; 2.兰州工学院, 甘肃 兰州 730070)
基金项目:“十二五”国家科技支撑计划项目(项目编号2012BAD06B03)
摘    要:采用MAT-LAB与ADAMS软件对4UFD-1400A1型薯类联合收获机提升装置接料与卸料过程进行了运动分析与仿真, 研究了其接料与卸料的运动规律,模拟了运动过程,分析确定了主要结构与运动参数,为该种物料提升装置的设计提供了理论依据。仿真分析表明,薯块提升装置设计合理,输送顺畅,对薯块损伤小,满足输送要求。

关 键 词:薯类收获机  提升装置  分析  仿真

Analysis and simulation on lifting device of 4UFD-1400A1 potato combine harvester
LIU Xing,WEI Hong-an,YANG Xiao-ping,LI Yan-jing,SUN Guang-hui,HU Zhong-qiang,SHI Ming-ming.Analysis and simulation on lifting device of 4UFD-1400A1 potato combine harvester[J].Journal of Shanghai Jiaotong University (Agricultural Science),2013(5):264-268.
Authors:LIU Xing  WEI Hong-an  YANG Xiao-ping  LI Yan-jing  SUN Guang-hui  HU Zhong-qiang  SHI Ming-ming
Abstract:The analysis and simulation of loading and unloading process of the lifting device in 4UFD-1400A1 potato combine harvester were conducted with the software of MAT-LAB and ADAMS, so as to make clear of the motion law and motion process of loading and unloading potato and to determine the main structure and motion parameters of the lifting device. The study could provide a theoretical proof for this lifting device. The simulating results showed that the design of the lifting device was reasonable, the transportation was successful and the injury of potato was little. Therefore, the system could meet the delivery requirements.
Keywords:potato harvester  lifting device  analysis  simulation
点击此处可从《上海交通大学学报(农业科学版)》浏览原始摘要信息
点击此处可从《上海交通大学学报(农业科学版)》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号