| 高密度纤维板数控雕刻加工工艺研究 |
| |
| 引用本文： | 李杰玲,沈佳龙,刘璐,周纯洁,张海霞,刘鑫荣. 高密度纤维板数控雕刻加工工艺研究[J]. 吉林林业科技, 2022, 51(1): 11-13. DOI: 10.16115/j.cnki.issn.1005-7129.2022.01.004 |
| |
| 作者姓名： | 李杰玲 沈佳龙 刘璐 周纯洁 张海霞 刘鑫荣 |
| |
| 作者单位： | 吉林省林业科学研究院, 吉林 长春 130033 |
| |
| 基金项目： | 吉林省财政公益项目(GY—2021—07)。 |
| |
| 摘 要： | 本文以高密度纤维板为原料,采用正交试验探究雕刻工艺对产品质量的影响,得到在该试验水平范围内最优雕刻工艺参数:主轴转速为24000 r·min-1,路径间距为0.20 mm,加工速度为6000 mm·min-1.为数控雕刻在高密度纤维板上应用提供了参考和技术支撑.
|
| 关 键 词： | 高密度纤维板 数控雕刻 工艺参数 产品质量 |
Research on CNC Engraving Process of High Density Fiberboard |
| |
| LI Jieling,SHEN Jialong,LIU Lu,ZHOU Chunjie,ZHANG Haixia,LIU Xinrong. Research on CNC Engraving Process of High Density Fiberboard[J]. Jilin Forestry Scicnce and Technology, 2022, 51(1): 11-13. DOI: 10.16115/j.cnki.issn.1005-7129.2022.01.004 |
| |
| Authors: | LI Jieling SHEN Jialong LIU Lu ZHOU Chunjie ZHANG Haixia LIU Xinrong |
| |
| Affiliation: | (Jilin Provincial Academy of Forestry Sciences,Changchun 130033,China) |
| |
| Abstract: | The high density fiberboard was selected as the experiment material in this paper.The orthogonal experiment was used to explore the impact of engraving process on the product quality.The optimal engraving process parameters within the scope of the levels of the experiment were determined.The optimal spindle speed was 24000 r·min-1,the optimal space between tool paths was 0.20 mm,and the optimal processing speed was 6000 mm·min-1.That provided reference and technical support for the application of CNC engraving on the high density fiberboard. |
| |
| Keywords: | HDF CNC engraving process parameter product quality |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
