Macropore flow estimations under no-till and till systems

The processes associated with water movement through silt loam soils involve both the flow through macropores as preferential flow or macropore flow and flow through the micropore as matrix flow. Macropore and matrix flow components were separated from total flow by a hydrograph-separation technique which used the assumption of dual porosity and a tracer mass balance. A mixture of potassium bromide was applied through a rain simulator to four plots in northern Mississippi in two rain events at 12.7 mm/h lasting 5 and 3 h separated by 6 h. The plots were either tilled or no-tilled with drains installed by two methods at the surface of the fragipan. The magnitude of water and bromide (Br⁻) transported by macropore flow to a drain line were estimated and the resulting hydrographs provided an indication of the potential significance of macropore flow in transporting water and non-reactive chemicals through macropores to the shallow groundwater system. Matrix flow appears to contribute the majority of the water moving to the drains even during the early stages of the drain flow hydrographs. The no-till plots produced more macropore flow than the tilled plots, independent of how the drains were installed. Macropore flow in the drainage at any time was small as compared to the matrix flow; however it contributed a disproportionate amount of Br⁻ tracer. These data support the concept that models used to predict mass balances using only the matrix (Darcian) flow will underestimate those chemicals that move like bromide into the soil profile.