首页 | 本学科首页   官方微博 | 高级检索  
     检索      

Effect of maleic anhydride grafted styrene-ethylene-butylene-styrene (MA-SEBS) on impact fracture behavior of polypropylene / wood fiber composites
引用本文:郭垂根,王清文.Effect of maleic anhydride grafted styrene-ethylene-butylene-styrene (MA-SEBS) on impact fracture behavior of polypropylene / wood fiber composites[J].林业研究,2007,18(3):203-207.
作者姓名:郭垂根  王清文
作者单位:MOE Key Laboratory of Bio-based Material Science and Technology, Northeast Forestry University, Harbin 150040, P. R. China
基金项目:国家高技术研究发展计划(863计划),national Foundation of Application of Agricultural Scientific and Technological Achievements
摘    要:MA-SEBS as compatibilizer and impact modifier was incorporated into Polypropylene/Wood Fiber (PP/WF) to enhance interface adhesion and impact strength of the composite. The effect of MA-SEBS content on the impact fracture behavior of PP/WF composites was studied. The impact properties of composites with 8% MA-SEBS reached the maximum value. And further increasing of MA-SEBS content to 10% did not improve the fracture toughness, but improved the stiffness of composites by DMA analysis. This was attributed to the improved PP/WF adhesion. As the MA-SEBS content is more than 8%, the molecule interaction of PP and WF was expected to much stronger than lower MA-SEBS. Scanning electron microscopy (SEM) was performed to analyze the impact fracture surface and showed a stronger affinity for the wood surfaces.

关 键 词:聚丙烯  菊科植物  木材纤维  冲击实验
文章编号:1007-662X(2007)03-0203-05
收稿时间:18 January 2007
修稿时间:2007-01-18

Effect of maleic anhydride grafted styrene-ethylene-butylene-styrene (MA-SEBS) on impact fracture behavior of polypropylene / wood fiber composites
Guo?Chui-gen,Wang?Qing-wen.Effect of maleic anhydride grafted styrene-ethylene-butylene-styrene (MA-SEBS) on impact fracture behavior of polypropylene / wood fiber composites[J].Journal of Forestry Research,2007,18(3):203-207.
Authors:Guo Chui-gen  Wang Qing-wen
Institution:(1) MOE Key Laboratory of Bio-based Material Science and Technology, Northeast Forestry University, Harbin, 150040, P. R. China
Abstract:MA-SEBS as compatibilizer and impact modifier was incorporated into Polypropylene/Wood Fiber (PP/WF) to enhance interface adhesion and impact strength of the composite. The effect of MA-SEBS content on the impact fracture behavior of PP/WF composites was studied. The impact properties of composites with 8% MA-SEBS reached the maximum value. And further increasing of MA-SEBS content to 10% did not improve the fracture toughness, but improved the stiffness of composites by DMA analysis. This was attributed to the improved PP/WF adhesion. As the MA-SEBS content is more than 8%, the molecule interaction of PP and WF was expected to much stronger than lower MA-SEBS. Scanning electron microscopy (SEM) was performed to analyze the impact fracture surface and showed a stronger affinity for the wood surfaces. Foundation project: This paper was supported by National 863 Program (2002AA245141) and national Foundation of Application of Agricultural Scientific and Technological Achievements (2006GB23600450) Biography: GUO Chui-gen (1976–), male, Ph.D. Lecturer in Northeast Forestry University, Harbin 150040, P. R. China.
Keywords:Polypropylene  Wood fiber/polypropylene composites  Fracture behavior  Impact test
本文献已被 维普 万方数据 SpringerLink 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号