| 互花米草木刨花复合碎料板制造工艺 |
| |
| 引用本文： | 陈涵.互花米草木刨花复合碎料板制造工艺[J].福建林业科技,2013,40(1):46-48,58. |
| |
| 作者姓名： | 陈涵 |
| |
| 作者单位： | 福建省林业科学研究院、福建省森林培育和林产品加工利用重点实验室,福建福州,350012 |
| |
| 基金项目： | 福建省科技厅科研项目“福建省主要茎秆类资源制作复合板材的技术研究”(编号:2010R1013-1);国家林业局南方山地用材林培育重点实验室资助 |
| |
| 摘 要： | 以互花米草碎料与木刨花为原料,以脲醛树脂为胶粘剂制作碎料板。采用正交试验探讨原料配比、施胶量、密度及防水剂添加量对碎料板性能的影响,结果表明:互花米草添加比例为35%、施胶量为14%、密度为0.75 g.cm-3、防水剂添加量为1.0%时,复合碎料板的各项性能达到最优。
|
| 关 键 词： | 互花米草 木刨花 脲醛树脂 碎料板 |
Manufacturing Technology of Spartina aherniflora Wood Shavings Composite Particleboard |
| |
| CHEN Han.Manufacturing Technology of Spartina aherniflora Wood Shavings Composite Particleboard[J].Journal of Fujian Forestry Science and Technology,2013,40(1):46-48,58. |
| |
| Authors: | CHEN Han |
| |
| Institution: | CHEN Han(Fujian Academy of Forestry;Key Laboratory of Forest Culture and Forestry Products Processing and Utilization of Fujian Province,Fuzhou 350012,Fujian,China) |
| |
| Abstract: | Using Spartina aherniflora and wood shavings as raw materials,and urea formaldehyde resin as adhesive,the composite particleboard was prepared.The orthogonal experiment was used to discuss the effects of mass ratio,resin content,board density,and water-repellent additive content on the raw material properties.The results showed that the optimum process parameters were as follows:35% of mass ratio of Spartina aherniflora,14% of resin content,0.75 g·cm-3 of board density,1.0% of water-repellent additive content. |
| |
| Keywords: | Spartina aherniflora wood shavings urea formaldehyde resin particleboard |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
