| 型孔轮式排种器弹性随动护种带装置设计 |
| |
| 引用本文： | 罗锡文,王在满,蒋恩臣,李就好,李庆,陈伟通.型孔轮式排种器弹性随动护种带装置设计[J].农业机械学报,2008,39(12):60-63. |
| |
| 作者姓名： | 罗锡文 王在满 蒋恩臣 李就好 李庆 陈伟通 |
| |
| 作者单位： | 华南农业大学南方农业机械与装备关键技术省部共建教育部重点实验室,510642,广州市 |
| |
| 基金项目： | 国家“863”高技术研究发展计划资助项目(项目编号:2006AA10A307); 农业科技成果转化资金资助项目(项目编号:2007GB2E000235); 广东省科技计划资助项目(项目编号:2003B21701); 广州市科技计划资助项目(项目编号:2006Z3-E0651) |
| |
| 摘 要： | 传统的型孔轮式谷物排种器都采用固定式护种板，由于种子与护种板之间的相对运动和摩擦，不可避免地会对种子造成损伤，同时会对护种板内表面和排种轮外表面造成磨损。设计了一种可拆式弹性随动护种装置，弹性护种带与排种轮一起转动，由于种子与护种带之间没有相对运动，大大降低了对种子的损伤和排种轮外表面的磨损。对弹性随动护种带装置的结构和护种带的材料、形状、强度和长度进行了优化设计。安装了弹性随动护种带的水稻精量穴直播机台架试验、样机试验和性能检测结果表明，稻种的破损率可降至0．3％。
|
| 关 键 词： | 型孔轮式排种器 弹性随动护种装置 水稻 种子破损率 |
Design of Disassemble Rubber Guard Device for Cell Wheel Feed |
| |
| Luo Xiwen Wang Zaiman Jiang Enchen Li Jiuhao Li Qing Chen Weitong.Design of Disassemble Rubber Guard Device for Cell Wheel Feed[J].Transactions of the Chinese Society of Agricultural Machinery,2008,39(12):60-63. |
| |
| Authors: | Luo Xiwen Wang Zaiman Jiang Enchen Li Jiuhao Li Qing Chen Weitong |
| |
| Institution: | Luo Xiwen Wang Zaiman Jiang Enchen Li Jiuhao Li Qing Chen Weitong(South China Agricultural University,Guangzhou 510642,China) |
| |
| Abstract: | Guard ring is usually used in the traditional cell wheel feed.Because of the relative movement and rub between the seeds and the guard ring,it will cause the damage of seeds and the wear and tear of the inner face of guard ring and the outer face of cell wheel.A disassemble rubber guard device was developed and the rubber guard tape could rotate with the cell wheel simultaneously.The rate of damaged seeds and the wear and tear of the outer face of cell wheel decreased significantly because there was no rela... |
| |
| Keywords: | Cell wheel feed Rubber guard device Rice Rate of damaged seeds |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《农业机械学报》浏览原始摘要信息 |
| 点击此处可从《农业机械学报》下载免费的PDF全文 |
