| 热压干燥对刨切单板背部裂隙的影响 |
| |
| 引用本文： | 杜洪双,唐朝发.热压干燥对刨切单板背部裂隙的影响[J].林产工业,2020,57(7):6-8,23. |
| |
| 作者姓名： | 杜洪双 唐朝发 |
| |
| 作者单位： | 吉林省木质材料科学与工程重点实验室(北华大学),吉林 132013 |
| |
| 基金项目： | 国家重点实验室开放基金;中央财政林业科技推广示范项目;国家自然科学基金 |
| |
| 摘 要： | 表板是刨切单板的三层实木复合地板表面易出现分布广泛的小裂纹。为此,研究在表板干燥环节采用压板干燥,以期减少刨切单板背部裂隙。运用对比法对干燥前后刨切单板背部裂隙形态及分布进行分析比较,结果表明:压板干燥能有效降低刨切单板背部裂隙,且对厚度3.0 mm和3.5 mm单板的背部裂隙愈合效果更好,但对宽深裂隙的愈合效果较差;压板干燥适合于以刨切单板为表板的三层实木复合地板的表板干燥。
|
| 关 键 词： | 干燥 热压板 刨切单板 三层实木复合地板 背部裂隙 |
Influence of Hot-pressing Drying on Sliced Veneer Back Crack |
| |
| DU Hong-shuang,TANG Chao-fa.Influence of Hot-pressing Drying on Sliced Veneer Back Crack[J].China Forest Products Industry,2020,57(7):6-8,23. |
| |
| Authors: | DU Hong-shuang TANG Chao-fa |
| |
| Institution: | (Jilin Provincial Key Laboratory of Wooden Materials Science and Engineering(Beihua University),Jilin 132013,P.R.China) |
| |
| Abstract: | The surface of the three-layer composite floor with face sliced veneer is prone to produce small cracks in large scale.To solve this problem,in this study,the hot-pressing drying was carried out in the drying process of the face veneer so that the back cracks of sliced veneer were reduced.The back crack morphology of the veneers before and after drying was compared by contrast method.The result showed that the back cracks of sliced veneer were effectively reduced by hot-pressing drying,and hot-pressing drying had better healing effect on back cracks of 3.0 mm and 3.5 mm veneers but poorer healing effect on wide-deep cracks,hotpressing drying was suitable for the use of face sliced veneer drying. |
| |
| Keywords: | Drying Hot-pressing board Sliced veneer The three-layer composite floor Back crack |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
