| 基于Pro/E的斗式提升机三维建模 |
| |
| 引用本文： | 刘梅英,牛智有,谭鹤群,宗力. 基于Pro/E的斗式提升机三维建模[J]. 农机化研究, 2009, 31(6) |
| |
| 作者姓名： | 刘梅英 牛智有 谭鹤群 宗力 |
| |
| 作者单位： | 华中农业大学,工程技术学院,武汉,430070;华中农业大学,工程技术学院,武汉,430070;华中农业大学,工程技术学院,武汉,430070;华中农业大学,工程技术学院,武汉,430070 |
| |
| 摘 要： | 斗式提升机是专门用于连续垂直输送散料的设备,由于其具有占地面积小、提升高度高且输送量大等特点,因而在饲料和粮食等加工厂中广泛使用.传统的设计方法是利用二维图形来表达三维信息,非常不直观且修改困难.为此,利用三维设计软件Pro/E对斗式提升机中的各零件进行三维建模和虚拟装配,能有效地帮助工程技术人员提高设计水平及工作效率.
|
| 关 键 词： | 斗式提升机 Pro/E 三维建模 虚拟装配 |
Three-dimension Modeling and Motion Simulation of Bucket Elevator Based on Pro/E |
| |
| Liu Meiying,Niu Zhiyou,Tan Hequn,Zong Li. Three-dimension Modeling and Motion Simulation of Bucket Elevator Based on Pro/E[J]. Journal of Agricultural Mechanization Research, 2009, 31(6) |
| |
| Authors: | Liu Meiying Niu Zhiyou Tan Hequn Zong Li |
| |
| Affiliation: | College of Engineering and Technology;Huazhong Agricultural University;Wuhan 430070;China |
| |
| Abstract: | Bucket Elevator is a conveying machine specially used for continuous and vertical convey.It has the advantages of small region accounts,high hoisting height and big conveying capacity,and is widely applied in animal feeds and foodstuff factory.The traditional design used two-dimensional drawings to express three-dimension information which was abstract and difficult to be modified.This research utilized 3D software Pro/E to carry out three-dimensional modeling of the parts of bucket elevator and virtual ass... |
| |
| Keywords: | Pro/E |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
