| 废弃纺织物/木刨花复合板制备工艺 |
| |
| 引用本文： | 孙照斌,张国梁,王新建,余领旗,张腾.废弃纺织物/木刨花复合板制备工艺[J].林业科技开发,2012(4):102-105. |
| |
| 作者姓名： | 孙照斌 张国梁 王新建 余领旗 张腾 |
| |
| 作者单位： | 河北农业大学林学院 |
| |
| 基金项目： | 国家标准制定项目“废旧人造板回收利用”(编号:20083175-T-432) |
| |
| 摘 要： | 采用常规热压法对废弃纺织物和木刨花制备复合人造板相关工艺进行了试验,并讨论了各因素对板性能的影响。结果表明:利用废弃纺织物和木刨花制备人造板在工艺上是可行的。制造复合板的较优参数:纺织纤维形态为碎布条或絮状纤维、刨花/碎布条配比为7∶3、施胶量为12%、密度0.7 g/cm3,最优配比制备的板材其物理力学性能都已达到GB/T4897.2-2003要求。
|
| 关 键 词： | 废弃纺织物 木刨花 复合板 工艺参数 |
Manufacturing technique of textile waste/wood flake composite panel |
| |
| SUN Zhao-bin,ZHANG Guo-liang,WANG Xin-jian,YU Ling-qi,ZHANG teng.Manufacturing technique of textile waste/wood flake composite panel[J].China Forestry Science and Technology,2012(4):102-105. |
| |
| Authors: | SUN Zhao-bin ZHANG Guo-liang WANG Xin-jian YU Ling-qi ZHANG teng |
| |
| Institution: | The Faculty of Forestry,Agricultural University of Hebei,Baoding,Hebei,071000,China |
| |
| Abstract: | Textile waste/wood flake composite panel was prepared by conventional hot pressing method.The influence of manufacturing techniques on panel performances was analyzed.The results showed that it was technically possible to develop a wood-based panel product with textile waste and wood flake.The optimum manufacturing parameters were achieved when the flake-fabric ratio,glue consumption and density were 7∶3,12% and 0.7g/cm,respectively.Textile waste in the form of strip or fiber was preferred.Physical and mechanical properties of panels prepared under such conditions could meet the demands of GB/T4897.2-2003. |
| |
| Keywords: | textile waste wood flake composite panel process parameters |
| 本文献已被 CNKI 等数据库收录！ |
|
