Comparative study between full cell and passive impregnation method of wood preservation for laser incised Douglas fir lumber |
| |
| Authors: | M Nazrul Islam Keisuke Ando Hidefumi Yamauchi Yoshinori Kobayashi Nobuaki Hattori |
| |
| Institution: | (1) United Graduate School of Agriculture, Tokyo University of Agriculture and Technology, 3-5-8 Saiwai-cho, Fuchu, Tokyo 183-8509, Japan;(2) Division of Ecosciences, Institute of Symbiotic Science and Technology, Tokyo University of Agriculture and Technology, 3-5-8 Saiwai-cho, Fuchu, Tokyo 183-8509, Japan;(3) Institute of Wood Technology, Akita Prefectural University, 11-1 Kaieizaka, Noshiro, Akita 016-0876, Japan;(4) K’S Wood Research Institute, 5-5-9 Naizen-cho, Kashihara, Nara 634-0804, Japan |
| |
| Abstract: | In this study, the ability of passive impregnation of Douglas fir (Pseudotsuga menziesii Franco) lumber was compared with a conventional full cell method. With an incising density of 10,000 holes/m2 carried out by CO2 laser, square Douglas fir lumber was treated by both passive impregnation and full cell method for 6 h and 50 min. Different
incising densities were also used in passive impregnation to examine the optimum incising density. It was observed that there
was no significant difference between these two methods regarding absorption of liquid, moisture content after dipping and
penetrated area both at cross and longitudinal sections. However, the value was higher in case of full cell method. Regarding
different incising densities, absorption and penetration of liquid was similar for 10,000 and 7,500 holes/m2 but it was low for 5,000 holes/m2. Therefore, it can be concluded that an incising density of 7,500 holes/m2 is the optimum for passive impregnation. The absorption of liquid and its distribution in wood indicates that this non-pressure
passive impregnation method can be a good preservation method for impermeable lumber and can be an alternative to full cell
method. |
| |
| Keywords: | |
| 本文献已被 SpringerLink 等数据库收录！ |
|
