| 露天矿相邻采区间内排压帮高度及 重复剥离深度的综合优化 |
| |
| 引用本文： | 刘光伟,李鹏,李成盛,王桂林,白润才,付恩三. 露天矿相邻采区间内排压帮高度及 重复剥离深度的综合优化[J]. 保鲜与加工, 2015, 0(6): 23-30 |
| |
| 作者姓名： | 刘光伟 李鹏 李成盛 王桂林 白润才 付恩三 |
| |
| 作者单位： | 辽宁工程技术大学 矿业学院，辽宁 阜新 123000,辽宁工程技术大学 矿业学院，辽宁 阜新 123000,辽宁工程技术大学 矿业学院，辽宁 阜新 123000,神华准能公司 黑岱沟露天煤矿，内蒙古 准格尔 010300,辽宁工程技术大学 矿业学院，辽宁 阜新 123000,辽宁工程技术大学 矿业学院，辽宁 阜新 123000 |
| |
| 基金项目： | 国家自然科学基金重点项目(51304104)。 |
| |
| 摘 要： | 分析了不同压帮方式的内排运距特点与计算原理，建立了内排压帮高度及重复剥离深度的数学模型，得出通用的计算公式并给出有效判据。以黑岱沟露天矿为例，采用费用补偿法确定最优的内排压帮高度，利用最小重复剥采比确定最佳的重复剥离深度。研究结果表明：分区开采露天矿相邻采区间内排压帮高度与重复剥离深度需同时确定，以费用补偿法建立的数学模型简单且可靠，研究成果对露天矿相邻采区间生产设计具有指导意义。
|
| 关 键 词： | 露天矿；相邻采区；内排压帮高度；重复剥离深度；费用补偿法 |
| 收稿时间： | 2015-07-06 |
Inner dumping covering height and repeated stripping depth of adjacent mining area in surface coal mines |
| |
| LIU Guangwei,LI Peng,LI Chengsheng,WANG Guilin,BAI Runcai and FU Ensan. Inner dumping covering height and repeated stripping depth of adjacent mining area in surface coal mines[J]. Storage & Process, 2015, 0(6): 23-30 |
| |
| Authors: | LIU Guangwei LI Peng LI Chengsheng WANG Guilin BAI Runcai FU Ensan |
| |
| Affiliation: | College of Mining, Liaoning Technical University, Fuxin 123000, Liaoning, P.R.China,College of Mining, Liaoning Technical University, Fuxin 123000, Liaoning, P.R.China,College of Mining, Liaoning Technical University, Fuxin 123000, Liaoning, P.R.China,Heidaigou Surface Coal Mine, Shenhua Zhungeer Energy Corp., Jungar 010300, Inner Mongolia, P.R.China,College of Mining, Liaoning Technical University, Fuxin 123000, Liaoning, P.R.China; and College of Mining, Liaoning Technical University, Fuxin 123000, Liaoning, P.R.China; |
| |
| Abstract: | Features and calculation principles of inner dumping haul distances for various types of inner dumping covering are analyzed, mathematical modes about inner dumping covering height and repeated stripping depth are set up, and some general calculation formulas and feasible criteria are given. Taking Heidaigou surface coal mine as an example, we adopt a method of expense compensation to determine the optimal inner dumping covering height, and use the minimum repeated stripping ratio to determine the best repeated stripping depth. Results show that inner dumping covering height and repeated stripping depth must be determined at the same time, and the mathematical modes established by the method of expense compensation are not only simple but reliable. In addition, the research results can provide reference for the production of adjacent mining area in surface coal mines. |
| |
| Keywords: | surface coal mine adjacent mining area inner dumping covering height repeated stripping depth method of expense compensation |
|
| 点击此处可从《保鲜与加工》浏览原始摘要信息 |
|
点击此处可从《保鲜与加工》下载全文 |
|
