Changes in chemical composition of Phoenix canariensis Hort. Ex Chabaud palm seed oil during the ripening process

The aim of this investigation is to compare the physicochemical properties and chemical composition of Phoenix canariensis seed oil at different stages of seed date ripening. It was demonstrated that the saponification number of the oil increases during the maturation from 179.24 to 191.28 (mg KOH/g of oil), whereas the seed oil yield, the iodine number, the p-anisidine value, the peroxide value, the acidity and the unsaponifiable matter decrease from 14.73% to 10.36%, from 89.37 to 76.66 (g/100 g of oil), from 5.51 to 3.67, from 17.66 to 3.62 (mequiv. O₂/kg of oil), from 1.49% to 0.59% and from 2.72% to 1.77%, respectively. The tocol content increases as the maturity advanced. The percentages of sterols show continuous changes during ripening. The saturated fatty acid content increases throughout the ripening process. The oleic fatty acid content decreases during the seeds maturation, but increases at the end, whereas linoleic acid content initially shows an increase, and then a decrease. The total phosphorus content decreases during the period of ripening. The three samples of the seed oil show a high kinetic stability during the heating and cooling, as characterised by the differential scanning calorimetry (DSC). The DSC curves reveal an increase in the melting point from −7.73 °C to 3.71 °C but the melting enthalpy remains the same, 62.06 J/g, during the ripening of the dates.     

Nutritional Composition and Thermal Properties of Goldstripe Sardinella (Sardinella gibbosa) Fillets and By-Products

Fish is a nutritious food for the whole family and a good source of protein and n-3 fatty acids. The fish-processing industry produces tonnes of fish-processing waste and by-products annually. Disposal of untreated by-products of the fish-processing industry may cause environmental pollution. Sardinella gibbosa or goldstripe sardinella is commonly used in surimi and fish cracker productions in Malaysia. However, data on the nutritional composition of goldstripe sardinella fillets (GSF) and by-products (GSB) remain limited. The objectives of this study are to determine the nutritional composition and thermal properties of fillets and by-products of S. gibbosa. Results showed that the protein and moisture contents of GSF were higher than GSB. Conversely, the ash and fat levels of GSF were lower than GSB. Levels of saturated fatty acids (SFA) in GSF and GSB were higher than monounsaturated fatty acids (MUFA) and polyunsaturated fatty acids. Palmitic acid and oleic acid were the major SFA and MUFA found in GSF and GSB. Both GSF and GSB contain higher percentages of DHA and EPA. Melting and crystallization profiles of the oil from S. gibbosa fillets were similar to by-product oil, which was related to their fatty acid content.     

封闭异氰酸酯改性脲醛树脂制备胶合板

采用亚硫酸氢钠封闭异氰酸酯改性UF树脂制备胶合板,研究了制板用混合胶液的比例、热压时间、热压温度等热压工艺对胶合板性能的影响,结果表明,在UF/PAPI=100/10、热压温度为110℃、热压时间为4min时,所制备胶合板的甲醛释放量达到国家标准,并且具有较高的胶合性能.     

Suitability of tef varieties in mixed wheat flour bread matrices: A physico-chemical and nutritional approach

Wheat flour replacement from 0 to 40% by single tef flours from three Ethiopian varieties DZ-01-99 (brown grain tef), DZ-Cr-37 (white grain tef) and DZ-Cr-387 (Quncho, white grain tef) yielded a technologically viable ciabatta type composite bread with acceptable sensory properties and enhanced nutritional value, as compared to 100% refined wheat flour. Incorporation of tef flour from 30% to 40% imparted discreet negative effects in terms of decreased loaf volume and crumb resilience, and increase of crumb hardness in brown tef blended breads. Increment of crumb hardness on aging was in general much lower in tef blended breads compared to wheat bread counterparts, revealing slower firming kinetics, especially for brown tef blended breads. Blended breads with 40% white tef exhibited similar extent and variable rate of retrogradation kinetics along storage, while brown tef-blended breads retrograded slower but in higher extent than control wheat flour breads. Breads that contains 40% tef grain flour were found to contain five folds (DZ-01-99, DZ-Cr-387) to 10 folds (DZ-Cr-37) Fe, three folds Mn, twice Cu, Zn and Mg, and 1.5 times Ca, K, and P contents as compared to the contents found in 100% refined wheat grain flour breads. In addition, suitable dietary trends for lower rapidly digestible starch and starch digestion rate index were met from tef grain flour fortified breads.     

Development and Characterization of Calcium-Alginate Beads of Apigenin: In Vitro Antitumor,Antibacterial, and Antioxidant Activities

The objective of this work was to develop sustained-release Ca-alginate beads of apigenin using sodium alginate, a natural polysaccharide. Six batches were prepared by applying the ionotropic gelation technique, wherein calcium chloride was used as a crosslinking agent. The beads were evaluated for particle size, drug loading, percentage yield, and in vitro drug release. Particle size was found to decrease, and drug entrapment efficiency was enhanced with an increase in the polymer concentration. The dissolution study showed sustained drug release from the apigenin-loaded alginate beads with an increase in the polymer proportion. Based on the dissolution profiles, BD6 formulation was optimized and characterized for FTIR, DSC, XRD, and SEM, results of which indicated successful development of apigenin-loaded Ca alginate beads. MTT assay demonstrated a potential anticancer effect against the breast cancer MCF-7 cell lines. The antimicrobial activity exhibited effective inhibition in the bacterial and fungal growth rate. The DPPH measurement revealed that the formulation had substantial antioxidant activity, with EC50 value slightly lowered compared to pure apigenin. A stability study demonstrated that the BD6 was stable with similar (f2) drug release profiles in harsh condition. In conclusion, alginate-based beads could be used for sustaining the drug release of poorly water-soluble apigenin while also improving in vitro antitumor, antimicrobial, and antioxidant activity.     

差示扫描量热法在大豆蛋白产品品质检测中的应用

差示扫描量热分析仪(DSC仪)因其使用方便,精确度高等特点,多年来备受青睐.综述了近20年来DSC分析仪在大豆蛋白产品品质测定中的典型应用,涉及试验条件的选择及因试验条件不同导致的试验结果的差异.主要包括升温速率、保护气体、样品量、液体样品的溶剂等条件对样品热稳定性的影响.     

Effects of storage on the physico-chemical properties of corn tortillas prepared with glycerol and salt

Corn tortillas have a short shelf life due to increased firmness and microbial spoilage. Commercial corn tortillas use carboxymethyl cellulose (CMC) to delay staling; however this gum is expensive when compared to the rest of the tortilla ingredients. Glycerol has been added to bread and wheat tortillas to increase pliability and salt has been shown to mask the flavor of glycerol in corn tortillas. The possibility to reduce staling in corn tortillas by adding glycerol/salt as an alternative to CMC was investigated by monitoring changes in physico-chemical properties during 2 weeks of storage at 25 °C. Molecular and macroscopic changes were followed using thermal and mechanical analysis. During storage an increase in amylopectin recrystallization was observed in all samples. The “freezable” water content of all tortillas decreased over the first 3–5 days of storage with an increase after 7 days, while moisture content and water activity remained constant. Glycerol/salt tortillas exhibited a sharper transition region in the DMA temperature scan suggesting a more homogenous sample. CMC tortillas were significantly stiffer than glycerol tortillas after 14 days of storage. Glycerol/salt combinations may offer at least a partial replacement for CMC since it helped control the stiffness, water homogeneity and distribution during storage.     

基于低场核磁和差示量热扫描的面条面团水分状态研究

为了解低水分面条面团中水分的存在状态,明确真空度及和面时间对水分状态的影响,该研究以3个小麦品种（济麦20、宁春4号、济麦22）磨制的面粉为材料,采用真空和面制作低水分面条面团（含水率35%）,采用低场核磁共振技术（LF-NMR,low-field nuclear magnetic resonance）和差示量热扫描（DSC,differential scanning calorimetry）2种技术,测定不同真空度（0、0.06、0.09 MPa）和搅拌时间（4、8、12 min）下面团中水分的形态和分布,并进一步分析2种技术测定水分形态结果的相关性。结果表明,在低水分面条面团中,水分主要以弱结合水形态存在。不同品种的小麦粉面团的水分形态及分布存在差异,强筋小麦粉（济麦20）制作面团的水分自由度较低。真空和面（0.06 MPa）可以促进水分与面筋蛋白的相互作用,降低面团中水分子流动性,促进水分结构化;而非真空或过高真空度均会导致面团中水分自由度增加。济麦20、济麦22小麦粉和面时间为8 min时,面团水分流动性较低;而宁春4号小麦粉面团在4 min时,水分自由度较低;继续搅拌,深层结合水减少、弱结合水增多。LF-NMR和DSC测得面团水分状态的结果具有一致性。LF-NMR测得的弱结合水峰面积百分比与DSC测得的可冻结水百分比具有相同的变化趋势（r=0.695）,且深层结合水峰面积百分比与非冻结水百分比具有相同的变化趋势（r=0.564）。研究结果为认识制面过程中水分的作用,优化和面工艺和调整产品特性提供参考。     

Rheological and Thermal Properties of Potato Starch

<正>Particle size, rheological and thermal properties of potato starch from Yunnan province of China was investigated. The particle size ranges from 0.429-102.3 μm determined by laser light-scatter. The major flow type of 6 w/v% potato starch was shear-thinning fluid even the shear rate up to 800·s-1, and the gel formed by 6 w/v% potato starch fell to weak gel for its little difference between G′ and G′′, high dependence on frequency and low value of G′(Pa). The hardness and cohesiveness of potato starch gel were 31.3 g and 131.9 g·s, respectively. The thermal properties of potato starch were also determined by DSC at the starch∶ water = 3∶ 1. The To, Tp, and △H of potato starch were 62.23℃, 67.31℃, and 2.22 J·g-1.     

Effect of high-pressure treatment on rheological,thermal and structural changes in Basmati rice flour slurry

Rheological, thermal and structural changes in high pressure (HP) treated Basmati rice flour dispersions were studied as function of pressure level (350–650 MPa), slurry concentration (with 1:5, 1:3 and 1:2 flour-to-water ratios) and holding time (7.5–15 min). Rice flour dispersions exhibited a gradual liquid–solid gel transformation as they gelatinized and/or denatured and behaved as viscoelastic fluid following HP treatment. Mechanical strength (G′) of pressurized gel increased with applied pressure and rice concentration. Differential scanning calorimeter (DSC) thermograms of rice slurry measured after pressure treatment indicated a reduction in peak enthalpy in proportion with the extent of gelatinization and/or denaturation of starch and proteins. Pressure-treated rice samples had a progressively lower gelatinization temperature. A 15 min pressure treatment at 550 MPa was found sufficient to complete gelatinization of protein free isolated rice starch while the slurry required 650 MPa. The presence of proteins might have been responsible for the slower starch gelatinization in the rice slurry during pressure treatment. The sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) and Fourier-transform infrared (FTIR) spectroscopy results indicated some minor changes in protein subunits and secondary structure of rice protein. This study has provided complementary information on pressure-induced changes in physical (thermal stability, overall structure) and molecular level (secondary structure) of rice protein.