运用机载LiDAR数据对橡胶林地上生物量估测的采样尺度效应分析

气候变化下,森林生物量遥感监测是当前研究的热点,机载LiDAR作为重要的遥感信息源,其采样大小对生物量估测精度有着一定的影响。以机载LiDAR数据为信息源,以44块30m×30m的方形橡胶林实测样地数据为基础,对机载激光雷达数据进行不同尺寸采样(共21个采样尺寸,边长从10m至30m,间隔为1m),提取不同采样尺寸下的激光雷达参数,并与橡胶林地上生物量建立PLSR模型,就机载激光雷达采样大小对橡胶林地上生物量估测精度的影响进行研究。研究表明:当采样尺寸小于18m时,估测精度随着采样尺寸的增大而增大;而当采样尺寸大于18m时,估测精度随着采样尺寸的增大而减小,进而趋于平缓。结果虽然呈现出一定的规律性,但是差异并不是很明显。当采样尺寸为18m时估测效果最佳,模型决定系数(R^2)为0.718,均方根误差(RMSE)为17.830 t/hm^2;交叉验证精度P和RMSEcv分别为82.741%和18.874t/hm^2。相较于实际样地(30m)尺寸下的估测结果,18m采样尺寸下的R^2提高了1.989%,RMSEcv降低了2.611%。因此,生物量的估测精度受机载激光雷达数据采样尺寸大小的影响,在生物量估测过程中需结合研究对象和研究区的实际情况对采样尺寸进行选择,从而提高生物量估测精度。     

水匮乏指数在区域水安全评价中的应用

针对水安全问题,以农垦红兴隆分局为例,采用水匮乏指数和样本均值-标准差分级法对红兴隆分局下属12个农场2006年的水安全状况进行了评价和分级,并根据分级结果提出了相应的对策。结果表明,八五三和红旗岭农场的WPI值处于安全状态,水安全状况最为乐观;饶河农场的WPI值处于较高安全状态,水安全状况较好;友谊、五九七、八五二、二九一和江川农场的WPI值处于中等安全状态,水安全保障体系有待于进一步加强;北兴农场的WPI值处于较低安全状态,水安全状况较差;而双鸭山、曙光和宝山农场的WPI值处于不安全状态,水安全状况最差。     

发展中国化的先进制造技术

对先进制造技术的发展与我国目前的现状作了分析，立足于我国国情，提出了发展中国化的先进制造技术的策略。     

欧洲赤松—云杉混交林分生长的研究

1966年在苏联弗拉基米尔州设立了“自然纪念林”固定标准地。该林分为Ⅰ_a地位级的单层混交天然林。组成为8松2云,林分年龄150年(松树),每公顷蓄积为927.1 m~3,其中用材占93.3％,木材剩余物占6.4％,薪材占0.3％。用材中98％可造锯材,2％造矿柱。经过15年,林分组成和地位级仍与期初相同。欧洲赤松平均树高增长1.3m;但云杉变化很小。欧洲赤松和云杉平均直径分别增长0.8和1.6 cm。林分内林木虽有枯死,但“自然纪念林”林分仍具有很高生产力,是俄罗斯珍贵的森林。     

区域旅游资源开发定位研究——以内蒙古赤峰市为例

区域旅游资源开发是发展区域旅游的基础 ,开发的定位研究有助于为一地旅游业的发展指明方向。本文从区域角度和空间经济一体化思想出发 ,以赤峰市为例 ,通过对旅游资源的定量与定性研究 ,得到旅游资源的综合评价图式 ,结合区际分析归纳出赤峰市旅游资源开发利用的方向和层次。从而为区域旅游开发的定位研究进行了一般理论的探讨及例证分析     

A leakiness index for assessing landscape function using remote sensing

The cover, number, size, shape, spatial arrangement and orientation of vegetation patches are attributes that have been used to indicate how well landscapes function to retain, not ‘leak’, vital system resources such as rainwater and soil. We derived and tested a directional leakiness index (DLI) for this resource retention function. We used simulated landscape maps where resource flows over map surfaces were directional and where landscape patch attributes were known. Although DLI was most strongly related to patch cover, it also logically related to patch number, size, shape, arrangement and orientation. If the direction of resource flow is multi-directional, a variant of DLI, the multi-directional leakiness index (MDLI) can be used. The utility of DLI and MDLI was demonstrated by applying these indices to three Australian savanna landscapes differing in their remotely sensed vegetation patch attributes. These leakiness indices clearly positioned these three landscapes along a function-dysfunction continuum, where dysfunctional landscapes are leaky (poorly retain resources). This revised version was published online in July 2006 with corrections to the Cover Date.     

Evaluation of sampling methods and assessment of the sample size to estimate the weed seedbank in soil, taking into account spatial variability

As field sampling is time consuming, it is necessary to develop efficient sampling techniques to obtain accurate estimates of the weed seedbank in soil. The relative efficiency between sampling schemes depends on the spatial variability in weed seed density across agricultural fields. Spatial variability of the weed seed density was characterized by theoretical correlograms. A systematic sampling (square grill) scheme was considered and it was found that, taking into account spatial variability, this sampling scheme was more efficient than simple random sampling. As a result, the sample size can be reduced in comparison with that given in previous studies, where spatial correlation was ignored. The reduction depends on the correlation structure defined as a function of the ratio, τ, between the nugget effect and the sill of the variogram. The maximum reduction of the sample size, without loss of either precision or confidence level corresponds to the case where there is no nugget effect, τ = 0. The opposite extreme case, where the reduction is nil, corresponds to the case of a pure nugget effect τ = 1. The abaci based on given expressions are provided to determine the sample size in species whose spatial pattern can be fitted either to a Poisson or to a negative binomial distribution.     

Random point sampling to detect gain and loss in tree canopy cover in response to urban densification

Urban tree canopy cover (UTC) is a simple, and common, measure of urban forest resource. Urban infill development is likely to lead to losses in UTC under private tenure, at a time when local governments are setting ambitious targets to increase UTC overall. Simple, statistically rigorous methods are required to benchmark and track change in UTC, whilst identifying which land-use types or tenures experience change.We estimated UTC in six Melbourne suburbs in 2010 and 2015 by randomly sampling 2000 points across public land, public streetscapes and private land. We were able to detect a net change in UTC of <2% over five years to a 95% level of confidence. A significant net decrease in UTC (−2.4%) was only detected in one of the six suburbs. Two suburbs had a net increase in UTC by +2.7% over five years. On private land, there was often areas of UTC loss, but this was generally offset by canopy gain in other areas of the private realm as well as in streetscapes and public land. Losses in UTC on private land were mainly due to tree removal, with or without subsequent construction works.This study describes a simple, but statistically rigorous, method to quantify UTC change and the drivers of change in different land-use types and tenure. Despite studying two suburbs will high rates of infill development, only one suburb showed evidence of net UTC decrease. The ‘dynamic equilibrium’ in UTC, whereby canopy losses area approximately offset by concurrent canopy gain, means that ambitious targets being set by local governments to increase UTC may be difficult to achieve without changes in tree protection and infill development policy and planning.     

定向出菇技术对香菇产量和品质的影响

为了摸清定向出菇新技术对香菇(Lentinula edodes)产量和品质的影响,以传统免割保水膜袋法为对照,开展了定向出菇新技术的出菇试验。试验选用2个香菇品种L808和兴农1号,统计香菇产量,测量子实体形态的变化。结果表明,定向出菇新技术在产量上的表现因品种而异,对于品种L808,采用2种栽培方式,其产量持平;而对于品种兴农1号,采用定向出菇技术栽培的产量显著高于传统免割保水膜袋法;新技术在单菇重、菌盖直径等子实体形态特征指标方面优于传统的免割保水膜袋法。研究表明定向出菇新技术可用于香菇栽培。     

基于DTW距离的拖拉机传动轴载荷样本长度计算方法

针对工程领域载荷样本长度确定方法对农业机械载荷适用性较差的问题,提出了一种基于动态时间扭曲(DTW,Dynamic Time Warping)距离计算载荷样本长度的方法。首先,运用无线扭矩传感器获取犁耕作业下拖拉机传动轴的动态载荷,结合传动轴犁耕作业下的载荷特点,划分作业工况;再将作业循环叠加并经过归一化处理后进行DTW距离计算,确定传动轴载荷样本长度;最后,计算参数外推中均值混合正态分布函数的拟合参数相对误差。结果表明,运用DTW距离方法确定的载荷样本长度,能够使均值双正态分布函数拟合得到的参数相对误差保证在10%以内。近似均值精度估计法和均值曲线拟合法的拟合参数相对误差最大值分别为126.06%和80.62%,而基于DTW距离计算方法的拟合参数相对误差最大值为5.43%,验证了基于DTW距离的载荷样本长度计算方法的适用性。研究结果可为拖拉机传动轴田间试验载荷样本长度确定提供参考。