基于玻璃化转变的稻谷变温热风干燥工艺研究

为保证稻谷干燥后品质、提高干燥效率,基于不同含水率稻谷的玻璃化转变温度,提出变温热风干燥工艺。采用三因素五水平中心组合试验方法,以稻谷温度、初始含水率和热风风速为影响因素,以稻谷爆腰指数、整精米率和干燥时间为评价指标,研究稻谷玻璃化转变温度、恒温和变温干燥特性,模拟解析稻谷干燥过程中传热传质规律,以5、10、15℃的变温幅度进行变温干燥试验。结果表明,稻谷玻璃化转变温度与其含水率呈负相关,恒温干燥最佳工艺参数为稻谷温度47℃、初始含水率22.0%、热风风速0.50 m/s,干燥后稻谷爆腰指数70、整精米率57.67%、干燥时间195 min;与恒温干燥相比,以5℃和10℃为变温幅度的变温干燥工艺,干燥后稻谷爆腰指数分别降低了20和10,整精米率提高12.6、7.7个百分点,干燥时间缩短30 min和60 min。研究表明,基于玻璃化转变的稻谷变温热风干燥工艺明显改善了稻谷干燥后品质,提高了干燥效率。     

毕节特产珍稀药材圆珠半夏的HPLC指纹图谱分析

为毕节大方圆珠半夏质量标准的建立提供参考,采用HPLC法对10批不同产地及不同采收时间的圆珠半夏进行了指纹图谱研究。结果表明:测定的10批半夏样品有23个共有峰,共有峰面积为91.6%~95.8%,相对峰面积的RSD为0.12%~0.40%;共有峰的相对保留时间从0.182~1.810min,相对保留时间的RSD在0.02%~0.10%。结论,该方法具有良好的稳定性和重复性,可用于圆珠半夏化学成分分析。     

Transient heat transfer characteristics of air-array-jet impingement with different nozzle arrangements on high-tempera-ture flat plate in small jet-to-plate distance

Numerical studies on transient heat transfer characteristics of air-array-jet impingement with a small jet-to-plate distance and a large temperature difference between nozzles and plate were presented.The dimensionless jet-to-plate distance(H/D)was 0.2,and non-dimensional nozzle-to-nozzle spacing(S/D)was 3,4,5 and 6,respectively.It is found that the quenching time is shortened at a constant total mass flow at air jet inlet m·(m·=218.21 kg/h),and the heat transfer uniformity is deterio-rated as S/D increases.However,the adding reversed-flow nozzles can shorten the quenching time of the glass plate considerably with a modest change in the heat transfer uniformity.The results at variable m·are the same as those at a fixed m·.Furthermore,the parity and arrangement of nozzles are also discussed,It is found that an odd number of nozzles is more beneficial for transient heat transfer.Based on these results,an appropriate proposal for ultra-thin glass tempering process is presented.     

GMP玻璃化冷冻未成熟牛卵母细胞核成熟及冷冻损伤试验

本试验通过荧光染色的方法建立了未成熟牛卵母细胞在体外培养过程中第1次减数分裂的各个阶段的参考判定图谱;根据这个标准来观察毛细玻璃管(GMP)玻璃化冷冻对卵母细胞核成熟和冷冻损伤的影响。结果表明,从屠宰场废弃的卵巢表面卵泡内抽取的COCs,70%处于生发泡期,12.5%生发泡开始破裂,7.5%已开始浓缩,这说明从屠宰场获得的COCs有较高的异质性;卵母细胞在成熟培养22h时收获排出第一极体的卵母细胞,可得到丰度较高的极体-胞质染色体对称、紧密相邻的成熟卵母细胞;GMP玻璃化冷冻损伤主要有2种表现形式,首先,直接影响膜结构的完整性,包括细胞膜和核膜,这可从退化的细胞比例看出(8～24h,有21.9%～27.2%的细胞处于该阶段),其次,影响CONDENSED向MⅠ期的过渡,这可从处于CONDENSED卵母细胞的比例看出(8～24h,有24.1%～34.3%的细胞处于该阶段)。     

现代玻璃温室智能气动天窗系统设计与研究

为满足现代温室对室内环境越来越高的要求，采用快速、安全、可靠、低成本的气动自动化技术设计气动天窗系统，可以实现天窗系统开闭与开度的自动化调控。为此，讨论了气动天窗系统的原理，得出了驱动气缸负载模型以及各级风速下气缸负载特性，探讨了该系统可行性和特点。与传统技术比较，气动系统完全可以取代机械式开天窗，而且结构简单，操作方便，位置控制精度高，天窗开度和通风面积显著增加，增强了利用自然通风调节温室环境的能力。     

真空平板玻璃传热理论分析及试验

利用辐射-导热耦合模式分析真空平板玻璃的传热途径,通过传热量和传热系数的计算模型,建立真空玻璃的传热控制方程,计算出真空玻璃结构沿高度方向的温度分布和热流通量,并用试验验证了理论计算结果正确性。试验结果表明,真空玻璃传热系数与真空压强成正比,真空度决定真空玻璃绝热性能;真空玻璃外面镀低辐射膜隔绝了较多的辐射热交换,其效果比内面镀膜好。     

Developmental changes in pituitary–thyroid axis, and formation of gonads in leptocephali and glass eels of Anguilla spp.

SUMMARY: Pituitary, thyroid gland and gonads in leptocephali of Japanese eel Anguilla japonica (19.8–32.6 mm in total length), A. obscura (45.0 mm), and A. bicolor pacifica (49.5 mm) and those in glass eels of the Japanese eel were histologically and immunohistochemically examined in order to observe the developmental changes of these endocrine organs in the Anguillidae. The pituitary, consisting of adenohypophysis and neurohypophysis in Japanese eel leptocephali over 22.5 mm, did not contain thyroid stimulating hormone (TSH) immunoreactive cells. Such cells were, however, detectable in the more developed pituitaries of leptocephali of A. obscura and A. bicolor pacifica and in those of glass eels. Conversely, thyroxine (T₄)-immunoreactive thyroid follicles could be detected in all specimens, both leptocephalic and glass eel. Only in glass eels, gonads were found in the body cavity, and these gonads harbored one or two primordial germ cells (PGC) per cross-section. Our results indicate that thyroid hormones (TH) production started prior to TSH production, and that TSH and TH are both secreted during the metamorphosis from leptocephalus to glass eel. Therefore, it is plausible that the TSH–TH axis is involved in the metamorphosis from leptocephalus to glass eel, but not in the early growth from preleptocephalus to leptocephalus.     

溶胶－凝胶法制备SiO2/NR复合材料的力学性能

将SiO2与天然橡胶的制备工艺相结合，先以价格低廉的水玻璃为原料，采用溶胶－凝胶法制备SiO2溶胶和凝胶，再以天然鲜胶乳共沉－共凝制备SiO2/NR复合材料，考察了制备工艺条件对复合材料力学性能的影响。结果表明，制备SiO2/NR复合材料较适宜的复合工艺为院水玻璃与乙酸乙酯反应温度30益，乙酸乙酯和水玻璃溶液中所含SiO2的摩尔比n为0.8∶1，水玻璃浓度为6.5%。当SiO2用量为10份时，复合材料的拉伸强度和撕裂强度分别达到了33.4MPa和47.1kN·m-1。     

乳清蛋白对以麦芽糊精为助剂桑葚汁喷雾干燥性能影响

桑葚富含多酚类物质,具有一定的营养与保健功能。多酚类物质在加工及贮藏过程中非常不稳定,喷雾干燥法微胶囊包埋是保护生物活性成分常采用的方法。但是,果汁喷雾干燥过程中极易出现黏壁现象,导致粉末回收率较低。基于此,研究不同比例乳清分离蛋白(WPI)与麦芽糊精(MD)对喷雾干燥桑葚粉理化特性的影响。结果表明,进料液中以少量WPI取代MD能显著提高桑葚粉的回收率,WPI较高的表面活性与良好的成膜性是使桑葚粉回收率提高的主要原因。随着进料溶液中WPI质量分数的增加,桑葚粉含水率增加;水分活度、堆积密度、粒径、水溶性指数和玻璃化转变温度呈降低趋势,而吸湿性则无明显变化。随着进料溶液中WPI质量分数的增加,桑葚粉L值、b值增加,a值降低,色差ΔE增加。桑葚粉的总酚含量与清除自由基能力随进料溶液中WPI质量分数的增加呈降低趋势。当进料溶液中桑葚汁/MD/WPI质量比为65∶(34.5~30.0)∶(0.5~5.0)时,既能有效解决黏壁问题,又能较好地抑制桑葚汁中多酚类成分降解,使桑葚粉具有较高的抗氧化能力。