计算机犬病诊断原理

本研究模拟人类专家的诊断过程,对常见犬病用计算机进行诊断模拟,试验建立了犬病诊断的计算机处理系统(QBZD)。本文主要阐述了QBZD系统的结构构成、诊断机理及操作应用     

猪胆囊中沙门菌L型的分离培养与invA基因检测

为了解猪胆囊中沙门菌L型携带情况,在贵阳市屠宰场采集970例健康生猪的胆囊组织与胆汁标本,用常规细菌学方法和非高渗分离培养法分离沙门菌及其细菌L型,用PCR和核酸序列分析方法对稳定L型纯培养物进行沙门菌的invA基因检测。结果显示,970例生猪胆囊标本未检出沙门菌细菌型,细菌L型检出率为8.25%;80例细菌L型分离物中有50例invA检测阳性,占5.15%;占细菌L型阳性分离物62.50%。研究结果为生猪胆囊沙门菌L型感染的流行病学及其检查提供了依据。     

乡镇污水处理厂运行管理相关问题探讨

乡镇污水处理厂作为环保基础设施建设的重点,普遍存在重建设轻运营的问题。笔者结合重庆市实际情况,重点分析了乡镇污水处理厂运行管理中存在的问题,并有针对性地提出了建议,包括提高收集率、完善末端工艺、专业化运营、改变考核体系、优化污泥处置、加强再生利用和远程在线监控等。     

馈能型悬架的工作原理与结构方案评价

为了回收汽车车轴与簧载质量间的振动能量,提出一种既可以改善汽车的行驶平顺性又可以回收振动能量的悬架,称之为馈能型悬架。研究了几种馈能装置的工作原理,利用模糊综合评价方法对馈能型悬架的结构方案进行了评价,结果显示静液式馈能型悬架以显著差异的优势成为最可行的馈能型悬架结构方案。     

滚珠丝杠的温升及热变形对策

对滚珠丝杠的温升及热变形的对策进行了探讨,提出解决温升和热变形的方法,为滚珠丝杠的设计、安装、使用和维修提供参考.     

滚珠丝杠的温升及热变形对策

对滚珠丝杠的温升及热变形的对策进行了探讨，提出解决温升和热变形的方法，为滚珠丝杠的设计、安装、使用和维修提供参考。     

Survey of large circular and octagonal tanks operated at Norwegian commercial smolt and post-smolt sites

A survey was conducted to determine the geometry, operating parameters, and other key features of large circular or octagonal culture tanks used to produce Atlantic salmon smolt and post-smolt at six major Norwegian Atlantic salmon production companies. A total of 55 large tanks were reported at seven land-based hatchery locations, i.e., averaging 7.9 (range of 4–12) large tanks per land-based site. In addition, one 21,000 m³ floating fiberglass tank in sea was reported. Culture volume ranged from 500 to 1300 m³ for each land-based tank. Most tanks were circular, but one site used octagonal tanks. Land-based tank diameters ranged from 14.5 to 20 m diameter, whereas the floating tank was 40 m diameter. Maximum tank depths ranged from 3.5 to 4.5 m at land-based facilities, which produced diameter-to-average-depth ratios of 3.6:1 to 5.5:1 m:m. The floating tank was much deeper at 20 m, with a diameter-to-average-depth ratio of only 2.4:1 m:m. All land-based tanks had floors sloping at 4.0–6.5% toward the tank center and various pipe configurations that penetrated the culture tank water volume at tank center. These pipes and sloping floors were used to reduce labor when removing dead fish and harvesting fish.Maximum flow ranged from 3 to 19 m³/min per land-based tank, with 400 m³/min at the floating tank, but tank flow was adjustable at most facilities. Land-based tanks were flushed at a mean hydraulic retention time (HRT) of 35–170 min. Maximum feed load on each land-based tank ranged from 525 to 850 kg/day, but the floating tank reached 3700 kg/day. Almost half of the large tanks reported in this survey were installed or renovated since 2013, including the three tank systems with the highest flow rate per tank (greater than 17.6 m³/min). These more recent tanks were operated at more rapid tank HRT’s, i.e., from 34.8 to 52.5 min, than the 67–170 min HRT typical of the large tanks built before 2013. In addition, flow per unit of feed load in land-based tanks that began operating before 2010 were lower (19–30 m³ flow/kg feed) than in tanks that began operating later (33–40 m³ flow/kg feed). In comparison, the floating tank operates at a maximum daily tank flow to feed load of 160 m³ flow/kg feed, which is the least intensive of all tanks surveyed. Survey results suggest that the recently built tanks have been designed to operate at a reduced metabolic loading per unit of flow, a tendency that would improve water quality throughout the culture tank, all else equal. This trend is possible due to the ever increasing application of water recirculating systems.     

革命根据地农业生产互助组织考察

以大量原始史料为基础,对中国共产党在特定形势下发起的农业生产互助运动进行了研究,考察了这一时期革命根据地农业生产互助组织的组织特征、运行机制和绩效。     

伐区作业类型划分与集材作业系统相适应性的研究

本应用模糊聚类分析方法,选取作业区坡度、单位面积出材量、集材距离以及地表承载能力等作为因子,对吉林林区伐区作业类型进行了区划。又应用层次分析法,对与每类伐区相适应的集材作用系统进行系统分析。