水流冲击多段滞留气团的三维数值模拟

针对水气两相瞬变现象,充分考虑了水体弹性、气体可压缩性、水-气交界面的动态运动以及多段气团间相互作用,采用三维CFD方法对起伏管道内含多段滞留气团的水气两相作用进行建模和模拟,选择Standard k-ε湍流模型进行模拟研究,将三维计算结果、现有一维模型计算结果与试验结果进行对比分析,并通过水气两相分布图展现动态变化过程.结果表明:与一维模型相比,三维CFD模型能够更为准确地模拟起伏管道内瞬变压力波动,并且能够清楚描述水气掺混、耦合的动态变化.水流冲击初始两段滞留气团压力波动曲线显示,多气团间的瞬变压力并非同步变化,可能呈现多气团峰值压力交替出现的情况,这与初始气团长度密切相关.水气交界面自由变化,阻断水体长度时刻发生变化,当水体运动到管道弯曲处时会产生新的阻断水体,将气团分成若干部分.     

蜗壳式离心泵外特性仿真与实验研究

为探索不同仿真方法的适用性,对ns=157的单级蜗壳离心泵不同工况的扬程和效率进行定常和非定常计算,并分别分析了定常计算时不同叶片夹角及非定常计算时不同时间步长的影响,通过与实验对比,得到的主要结论有:定常计算仅适用于额定工况外特性仿真,其扬程和效率计算误差分别为4.9%和2.9%,而定常多相位的计算误差分别为7.1%和3.2%;非定常仿真计算时,以4°为时间步长,并间隔20°保存一次计算数据,较好地预测出扬程曲线走势,额定工况扬程和效率计算误差约1.1%和1.8%,但小流量和大流量区间扬程计算误差达到10%左右。因此在水力优化设计时,若只关注高效点位置及其扬程和效率,可采用定常计算,若还关注扬程曲线走势,则应采用非定常计算。     

基于有限元的汽车扭臂热锻工艺研究

文章以汽车扭杆力臂为研究对象,通过DEFORM-3D有限元分析对汽车扭杆力臂热锻工艺过程进行模拟试验,分析了成形过程中的上模载荷情况、应力应变场分布情况和温度场的变化规律。以提高产品质量和降低载荷为主要目的,给出合理的热加工参数,分析结果能为类似锻件的热模锻工艺和模具设计提供依据。     

镇江长江豚类省级自然保护区水域生态修复效果的监测与评价

自2006年以来,长江豚类极度濒危的生存状况得到广泛关注,在其自然保护区实施一系列生态修复工程,为镇江长江豚类省级自然保护区内的江豚提供良好的生存环境。于2015—2018年在和畅洲水域建设生态浮岛、人工鱼巢和放流底栖动物进行水域生态修复,对生态修复工程进行跟踪监测和效果评价。结果表明：生态浮岛的建设可提高区域内浮游植物和浮游动物的生物多样性和群落结构复杂程度;人工鱼巢对产黏性卵鱼类具有一定增殖效果,增殖种类主要为鲤、鲫、䱗和黄尾鲴;生态浮岛和人工鱼巢的建设对鱼类均有较好的聚集效果;底栖动物增殖放流显著增加了放流物种的丰度、生物量及保护区底栖动物群落生物量,增殖放流效果评价为中等。该自然保护区水域生态修复效果明显,为工程施工影响下水生生物保护区生态修复提供科学依据。     

数值模型结构不确定性对模拟结果的影响分析

以内蒙古鄂托克旗为例,基于GMS中的MODFLOW模块构建了地下水流数值模拟模型,分析了模型结构(含水层厚度、参数分区)与模型参数不确定性因素对模拟结果的影响.研究结果表明:含水层不确定情景(含水层下边界概化为隔水底板平均值870 m)与实际情况水头差值绝对值的累计和最大为701 m,对模拟结果起了主控作用;当含水层下边界概化为910,940 m时,累计和分别增加为1 013,1 593 m;与仅考虑单个不确定性因素相比,同时考虑模型参数与含水层不确定情景累计和最大为738 m,同时考虑参数分区与含水层不确定情景累计和最大为791 m.因此,在构建地下水流数值模拟模型时,应优先考虑含水层空间结构概化的合理程度,同时考虑多个不确定性因素对模拟结果的综合影响,使地下水数值模拟模型能更精确地反映真实的地下水流状况.     

拖拉机室内台架试验技术现状与展望

作为拖拉机研发的重要验证手段，拖拉机室内台架试验可方便高效地为拖拉机模拟各种工况下的性能表现。首先探究动力总成控制技术、负载模拟技术、试验数据处理技术和试验结果评价技术4种拖拉机室内台架试验关键技术，结合试验技术的最新研究进展，对4种技术进行详细的阐述和分析。接着从动力总成控制算法、负载模拟算法、试验数据处理方法、试验结果评价指标体系4个方面对拖拉机室内台架试验技术进行讨论与展望。最后得出对动力总成算法进行优化、提高动态负载模拟精度、保持试验数据处理方法的前沿性、对试验结果综合客观评价是拖拉机室内台架试验技术的发展趋势，以期为我国拖拉机室内台架试验技术的发展提供参考。     

A comparison of the effects of carbon dioxide and medical air for abdominal insufflation on respiratory parameters in xylazine-sedated sheep undergoing laparoscopic artificial insemination

AIMS: To determine if abdominal insufflation with medical air will improve oxygenation and ventilation parameters when compared to insufflation with CO₂ in xylazine-sedated sheep undergoing laparoscopic artificial insemination (AI).

METHODS: Forty-seven sheep underwent oestrus synchronisation and were fasted for 24 hours prior to laparoscopic AI. Each animal was randomised to receive either CO₂ or medical air for abdominal insufflation. An auricular arterial catheter was placed and utilised for serial blood sampling. Respiratory rates (RR) and arterial blood samples were collected at baseline, after xylazine (0.1?mg/kg I/V) sedation, 2 minutes after Trendelenburg positioning, 5 minutes after abdominal insufflation, and 10 minutes after being returned to a standing position. Blood samples were collected in heparinised syringes, stored on ice, and analysed for arterial pH, partial pressure of arterial O₂ (PaO₂), and CO₂ (PaCO₂). The number of ewes conceiving to AI was also determined.

RESULTS: Repeated measures ANOVA demonstrated temporal effects on RR, PaO₂, PaCO₂ and arterial pH during the laparoscopic AI procedure (p<0.001), but no difference between insufflation groups (p>0.01). No sheep experienced hypercapnia (PaCO₂>50?mmHg) or acidaemia (pH<7.35). Hypoxaemia (PaO₂<70?mmHg) was diagnosed during the procedure in 14/22 (64%) ewes in the CO₂ group compared with 8/23 (35%) ewes in the medical air group (p=0.053). Overall, 15/20 (75%) ewes in the CO₂ group conceived to AI compared with 16/22 (72.7%) in the medical air group (p=0.867).

CONCLUSIONS AND CLINICAL RELEVANCE: There were no statistical or clinical differences in RR, PaO₂, PaCO₂, pH, or conception to AI when comparing the effects of CO₂ and medical air as abdominal insufflation gases. None of the sheep experienced hypercapnia or acidaemic, yet 42% (19/45) of sheep developed clinical hypoxaemia, with a higher percentage of ewes in the CO₂ group developing hypoxaemia than in the medical air group. Based on the overall analysis, medical air could be utilised as a comparable alternative for abdominal insufflation during laparoscopic AI procedures.     

Artificial burrow preference by the Japanese crayfish Cambaroides japonicus

SUMMARY: Preference for artificial burrows by the endangered Japanese crayfish species Cambaroides japonicus was studied to improve its cultivation. The occupation of artificial burrows, which were made from straight polyvinyl chloride pipes of different internal diameters ( Y , mm), by crayfishes of different total lengths ( X , mm) was significantly ( P < 0.001, n = 56) described by a linear regression: Y = 0.49 X + 3.42 (19.0 ≤ X ≤ 70.2). Among burrows of different lengths [crayfish total length (TL) × 1, × 2, × 3, and × 4], crayfishes significantly preferred burrows that were greater than TL × 3 ( P < 0.001, n = 588).     

基于ProE的香蕉假茎切块还田机构的模拟仿真设计与可行性试验

根据香蕉假茎先分段再进行无支撑切块还田的工艺设计思想，设计了香蕉假茎切块还田机构。该机构采用多把圆盘锯齿刀背刀交错布置于2条旋转轴上的类似对辊式运动原理的切块方法，利用ProE设计软件模拟仿真出合适的刀盘组合，以最快最准确的速度来完成切块机构的设计制作，并对此机构进行可行性试验。结果表明，采用嘲盘锯齿刀背刀交错布置在2条传动轴上的类似对辊式运动原理的切块机理可以实现切块作业。