河口平地蕉园土壤肥力状况分析

测定了云南河口平地蕉园土壤中各营养元素的含量,采用修正的内梅罗指数进行土壤肥力综合评价,结果表明,河口平地蕉园的土壤综合肥力属于一般水平,其中有机质、氮和全磷等主要养分含量缺乏,钾含量丰富,微量元素有效态铜、铁、锰、锌含量均丰富。     

Phenotypic and genetic characterization of Erwinia carotovora from mulberry (Morus spp.)

Phenotypic and genetic characteristics of nine bacterial strains isolated from mulberry ( Morus spp.), which were originally described as Erwinia carotovora ssp. carotovora (Ecc), were investigated. Based on the results of biochemical tests, these bacterial strains were divided into two different types, type 1 and type 2. Two strains of type 1 were similar to Ecc, whereas seven strains of type 2 were distinct from Ecc. A polyphasic study that included serological assay, specific PCR assay for E. carotovora ssp. atroseptica (Eca), PCR-RFLP of a pectate lyase ( pel ) gene and RAPD-PCR was performed on the type 2 strains, and the data were compared with those of related E. carotovora subspecies. The results of serological and specific PCR assays for Eca showed that the type 2 strains were distinct from Eca. In RFLP analysis of the pel gene using Sau 3AI, the type 2 strains showed a unique RFLP pattern. On the basis of RAPD analysis, similarity of RAPD patterns within the type 2 strains was very high. A unique RAPD fragment was isolated from the type 2 strains and used as a probe for Southern hybridization. This probe hybridized only with PCR products from the type 2 strains. Based on phenotypic, serological and genetic characteristics, the type 2 strains isolated from mulberry may belong to a distinct E. carotovora subspecies other than Eca or Ecc.     

基于热致液晶弹性体的仿生心脏泵的设计

为设计一款仿生心脏功能较佳的心室泵,采用柔性、热致伸缩的热致形变弹性体代替心肌,根据螺旋心室心肌带理论,选择心肌带的左心室段,并选取了Hilbert平面填充曲线作为热致导体在热致形变弹性体中的走行方式,设计出与真实心脏类似的心室泵结构.通过试验测量了所设计的心室泵的射血分数与心率,结果显示该心室泵的搏出量高于自然心脏,而其心率远低于自然心脏.相对于机械泵,所设计的心室泵结构与真实心脏类似,具有收缩能力强,射血分数高的优点,且不易破坏血细胞,生物相容性较好.不足之处在于,热致动液晶弹性体变形响应慢,暂时还未能达到正常心脏的心率.论证了构建双稳态结构,提高仿生心室泵效率的可能性,以及对于心肌纤维走向较为复杂的其他心肌带段,双轴拉伸机械雕刻对其仿生的可能性.此研究可为容积心脏泵的研发提供新的思路,也可以对右心衰竭等心脏疾病起到辅助治疗的作用.     

软基水闸底板脱空动力学反演模型构建与试验验证

软基水闸极易因地基不均匀沉降、渗透变形等发生底板脱空现象，传统的无损检测方法难以在水下探测底板脱空，且不具实时性，其应用还存在一定局限性。该研究基于软基水闸室内物理模型，提出了一种软基水闸底板脱空动力学反演方法。首先，基于多参数变量的底板脱空范围数学模型，改进了反映软基水闸底板脱空参数与水闸动力学参数（模态参数）之间非线性映射关系的数学代理模型；其次，以水闸多测点多阶频率和振型变化率组合作为动力学敏感特征量，建立了软基水闸底板脱空参数反演的目标函数，并基于遗传算法对目标函数进行求解。最后，建立了软基水闸室内物理模型，并在模型中设置3种不同的底板脱空工况，采用软基水闸底板脱空动力学反演方法对软基水闸底板的脱空进行反演识别与模型验证。结果表明：基于动力学参数反演识别的水闸底板脱空区域趋势和脱空面积与模型实际脱空情况吻合较好，3种工况下水闸底板脱空面积反演结果与模型实际脱空面积的相对误差分别为7.47%、6.78%、6.90%，验证了该方法的可靠性，可望为软基水闸实际工程底板脱空隐患检测提供一种新的思路。     

Growth pattern of Juncus effusus and Juncus conglomeratus in response to cutting frequency

Increasing abundance of Juncus effusus (soft rush) and Juncus conglomeratus (compact rush) in pastures and meadows in western Norway has caused reductions in forage yield and quality in recent decades. Understanding plant development and regrowth following cutting is essential in devising cost‐effective means to control rushes. In a field experiment in western Norway, we investigated development of above‐ and below‐ground fractions of rush from seedlings to three‐year‐old plants, including the impact on vigour of disturbing growth by different cutting frequencies during the period 2009–2012. Each year, the plants were exposed to one or two annual cuts or left untreated and five destructive samplings were performed from March to early December. Juncus effusus showed significantly more vigorous growth than Juncus conglomeratus in the last two years of the study period. The above‐ground:below‐ground biomass ratio of both species increased mainly in spring and early summer and was reduced in late summer and autumn. Removal of aerial shoots also reduced the below‐ground fraction of both species. One annual cut in July effectively reduced biomass production in both species by 30–82%, which was only a slightly smaller reduction than with two annual cuts, in June and August. Mechanical control measures such as cutting can thus effectively reduce rush vigour when performed late in the growing season.     

茉莉酸甲酯调控防御酶活性诱导猕猴桃果实抗采后软腐病

以‘金魁’猕猴桃果实为试验材料,研究茉莉酸甲酯(methyl jasmonate,MeJA)调控防御酶活性抗猕猴桃采后软腐病的效应。测定了MeJA对猕猴桃软腐病病斑直径、软腐病菌Botryosphaeria dothidea抑菌作用及超氧化物歧化酶(SOD)、过氧化氢酶(CAT)、过氧化物酶(POD)、抗坏血酸过氧化物酶(APX)和多酚氧化酶(PPO)等防御酶活性的影响。结果表明:在0.001～10 mmol/L浓度范围内,MeJA对猕猴桃软腐病菌B.dothidea的抑制作用随浓度升高而增强;MeJA对猕猴桃果实最佳诱导浓度和熏蒸时间分别为0.1 mmol/L和24 h,其诱导效果分别为26.01%和26.85%;猕猴桃果实经0.1 mmol/L MeJA熏蒸处理24 h后,SOD、POD、CAT、APX和PPO活性提高,其中SOD和POD活性分别较对照增加33.85%和61.61%,差异达显著水平(P0.05)。以上结果暗示MeJA诱导猕猴桃果实抗采后软腐病可能与其提高防御酶活性有关。     

基于Atmega64的直流电动机软起动器设计

直流电动机是重要的生产设备，起动是影响其寿命的关键因素。以蓄电池系统供电的直流电动机为研究对象。设计一种靠单片机控制，以IGBT为功率开关元件，采用PWM斩波降压的新型软起动器。相比传统的机械式起动器，它能实现连续无级的调节电动机起动，冲击转矩和冲击电流小，起动重复性好。     

贵州魔芋软腐病菌多基因分子鉴定及其致病力分析

为明确贵州魔芋软腐病菌种类?致病力及分布特点, 采用组织分离法对贵州主要魔芋种植区软腐病样进行病原菌分离, 对icdA, mdh, mtlD, proA, rpoS 等5个管家基因进行了扩增?序列测定, 分别用单基因和多基因联合系统发育树对病菌进行鉴定, 同时采用组织块接种方法测定了不同菌株的致病力?通过组织分离法共分离魔芋软腐病菌株47株; 采用5个管家基因进行分子鉴定, 将病菌分别鉴定为海芋果胶杆菌Pectobacterium aroidearum?胡萝卜果胶杆菌Pectobacterium carotovorum和方中达迪基氏菌Dickeya fangzhongdai 3个种, 其中海芋果胶杆菌P.aroidearum为贵州魔芋软腐病主要致病菌, 占分离菌株的70%, 广泛分布在多个地区; 其次为方中达迪基氏菌D. fangzhongdai, 占分离菌株的28%, 也普遍存在于贵州各魔芋种植区; 胡萝卜果胶杆菌P. carotovorum最少, 占分离菌株的2%?致病力测定结果表明, 菌株间致病力存在一定的差异, 其中海芋果胶杆菌不同菌株之间致病力差异较大, 低?中?高致病力菌株都有, 方中达迪基氏菌差异较小, 仅有中?高致病力菌株?本研究确定了贵州魔芋软腐病菌种类?致病力及在贵州的分布特点, 首次报道了海芋果胶杆菌?方中达迪基氏菌是贵州魔芋软腐病的主要病原菌, 进一步加深了对魔芋软腐病及其发生流行的认识, 为软腐病的科学防控提供了科学依据?